I've got a complete front bumper in good shape. The trims are all complete with no tears. Some minor rub marks on them. All bolts are there and intact. Normal problems with the bolts as they like to spin in their spots so I had to use a pair of vice grips to hold the heads as I spun off the nut on the back side. You'll see nothing when the bumper is assembled and installed. The only dents on the bumper that I see are on one of the bolt covers that trims the edge where the outside pieces and the center section go together. There are 3 tiny dings in it that can easily be taken out or you can buy a new piece. Personally I'd just pop out the dings with a small hammer and a block. The chrome could use a polish as is normal with these things. THere is only surface rust on the inside of the bumper. Mounts are present and all bolts to put them in are there. This bumper will come with 100% of the pieces to install including wiring for the turn signals. $200 plus shipping. Shipping will be 2 boxes, one costing $10.35 and the other will depend on your zip code due to size.
Also have a pair of early euro fogs to fit the euro valances and also I believe they will work in the Mtech I valance if you fab/change the brackets out on them. One is ZKW the other is Hella. I really have no clue what these go for. $110 shipped.
Also have a pair of early euro fogs to fit the euro valances and also I believe they will work in the Mtech I valance if you fab/change the brackets out on them. One is ZKW the other is Hella. I really have no clue what these go for. $110 shipped.
Comment