If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a complete m20 Im pulling out of the car as we speak. It should be out by mid afternoon tomorrow. Has 136k I belive and is your if you want to come pick it up for 200.
1991 e30 328i M52 swapped: Gone
1995 e34 540i/6 1 of 76 Clean
1985 e28 euro 525i the daily
Looks like your odo says 158k. What makes you believe she only has 136k?
How did she run before?
Would you happen to have compression numbers?
Also looks like it was paired with an automatic?! <--good news!
Last edited by badvibrations; 01-09-2010, 05:58 PM.
Reason: Look before you leap!
Equal rights should be all or nothing, not picked and chosen based on what's convenient for ones personal agenda.
I apologize on the guestimation I was just taking a stab at what I thought it was. 158k it is. I do not have compression number the car ran like champ as I understand until it blew a head gasket is what previous owner told me.
You can take the auto trany drive shaft or whatever other tid bits you may need as well. let me know ABQ is not that far from PHX
1991 e30 328i M52 swapped: Gone
1995 e34 540i/6 1 of 76 Clean
1985 e28 euro 525i the daily
So it needs a head gasket?
Knew $200 was too good to be true.
I'll keep you on the back burner but I am looking for an engine that is ready to drop in with minimal work.
Auto trans was good news cause it means the engine was likely not beat up upon.
Thanks for the reply.
The search continues.
I have one in NC.......but you must commit as i have to go pull it from the yard.......126,000 auto out of an '87 email usedeuropart@gmail.com Compression tested
I have one in NC.......but you must commit as i have to go pull it from the yard.......126,000 auto out of an '87 email usedeuropart@gmail.com Compression tested
I also have an m20b27 with the I to E head if you have an intake tract....can make a good deal on that
i also have a m20 complete engine but in pieces. so what you cannot get i could possibly ship to you. the engine i took apart had 170k just let me know if you need anything else. harness?
Thanks but I've seen this on a local forum. (azbmw.org check it out for meets and group drives) That is an m20b27 from an 'e'...I'm looking for the 'i' engine.
Thanks again,
Namaste
Equal rights should be all or nothing, not picked and chosen based on what's convenient for ones personal agenda.
Comment