I have a late model cluster in a fully 100% working condition. Has a 6cyl coding plug, if you are installing it in your late model 4cyl car you'll need to remove the 6cyl conding plug and install your 4cyl coding plug.
The following was done to it:
- front cover cleaned with meguiers plastic cleaner
- cluster taken apart to confirm gears are in good condition
- cluster taken apart to verify SI board batteries in good condition
- checked for any cracked/cold solder joints on the main board
- checked every bulb and replaced a few that were burned out
- cluster installed in my vehicle and test driven
- all gauges are working
- si board is reset to all green status
$125 shipped firm.
Pictures:
part number
front cover removed for cleaning and si board inspection, batteries already have been changed on it.
speedo/odometer mileage
gears are solid and not cracked or broken
si board all green lights
car is on, idling
warmed up and taken for a spin
Confirmed odometer working
The following was done to it:
- front cover cleaned with meguiers plastic cleaner
- cluster taken apart to confirm gears are in good condition
- cluster taken apart to verify SI board batteries in good condition
- checked for any cracked/cold solder joints on the main board
- checked every bulb and replaced a few that were burned out
- cluster installed in my vehicle and test driven
- all gauges are working
- si board is reset to all green status
$125 shipped firm.
Pictures:
part number
front cover removed for cleaning and si board inspection, batteries already have been changed on it.
speedo/odometer mileage
gears are solid and not cracked or broken
si board all green lights
car is on, idling
warmed up and taken for a spin
Confirmed odometer working
Comment