731 casting cylinder head from a euro 323i that i pulled MYSELF.
Car had 161k, there was no milkshake in the crankcase and the biggest gap with a straightedge was .001" measured across the entire head in 5 spots, and across each combustion chamber. I carefully examined the head in every possible spot for cracks. The head looks like it was a replacement because it is too clean to be an original however and the headbolts were the male torx replacements.
Cam has no grooves or wear marks, and neither do the rockers which appear to have about 90%+ wear left-they are like new.
I took the head apart like i always do to pressure wash it out and replace the valve seals which are being ordered. You will need to put in your own camshaft seal, camshaft housing o-ring, and water outlet gasket which come in a headgasket set.
400 shipped fedex, 48 states only unless you want to pay a ton extra for international shipping costs.
Will be shipped in high density styrofoam in a box.
Paypal only, all sales are final.
If you want the head to not be assembled for whatever reason or the head to be resurfaced or machined then i can make arrangements at the local competent engine building shop (who has built m20s before).
If you want a pic for whatever reason of the 731 part number then ask and ill post one up.
I polished the rocker shafts and rubbed some one the lobes to prevent oxidation since there is no oil on the parts.
Thanks for looking.
Car had 161k, there was no milkshake in the crankcase and the biggest gap with a straightedge was .001" measured across the entire head in 5 spots, and across each combustion chamber. I carefully examined the head in every possible spot for cracks. The head looks like it was a replacement because it is too clean to be an original however and the headbolts were the male torx replacements.
Cam has no grooves or wear marks, and neither do the rockers which appear to have about 90%+ wear left-they are like new.
I took the head apart like i always do to pressure wash it out and replace the valve seals which are being ordered. You will need to put in your own camshaft seal, camshaft housing o-ring, and water outlet gasket which come in a headgasket set.
400 shipped fedex, 48 states only unless you want to pay a ton extra for international shipping costs.
Will be shipped in high density styrofoam in a box.
Paypal only, all sales are final.
If you want the head to not be assembled for whatever reason or the head to be resurfaced or machined then i can make arrangements at the local competent engine building shop (who has built m20s before).
If you want a pic for whatever reason of the 731 part number then ask and ill post one up.
I polished the rocker shafts and rubbed some one the lobes to prevent oxidation since there is no oil on the parts.
Thanks for looking.
Comment