Will they fit an e
FS: Ground Control Rear Springs 750lbs
Collapse
X
-
Sure will,. My car is an e.** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
up to teh top.** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
Nvm
"Its preparations are concealed, not published. Its mistakes are buried not headlined. Its dissenters are silenced, not praised. No expenditure is questioned, no rumor is printed, no secret is revealed."
John F. Kennedy
Comment
-
I might be interested but bear with me. I have eibach pro's with regular billies, will these springs work with the shocks and will it lower the car more?
I use the car for drag racing and need to get the 235/60/15 drag radials to hook.
The rear squats 3" down and the contact patch probably goes from 235 to 195.
I'm thinking the the stiffer springs will help plant the tires better, they loose traction at 80mph with 20psi of air in them.

Last edited by Good & Tight; 04-14-2010, 04:57 PM.Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
____________________________
E-mail Panayiotisx2@gmail.com
Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=ULComment
-
They should work and lower the car apx 3'' from factory. You can get collars and rings from GC for $115 shipped , than use these.
Your pro kit is like a stock ride compared to these. I would almost say these may be too stiff for "launching", but I will 100% guarantee them not to squat more an 1/2 in at any point in time. They are very stiff.** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
I want to keep the ride height as is to have no camber at all.They should work and lower the car apx 3'' from factory. You can get collars and rings from GC for $115 shipped , than use these.
Your pro kit is like a stock ride compared to these. I would almost say these may be too stiff for "launching", but I will 100% guarantee them not to squat more an 1/2 in at any point in time. They are very stiff.
thanks for the reply.Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
____________________________
E-mail Panayiotisx2@gmail.com
Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=ULComment
-
You could grab some adjusters from GC and hike it back up to close to stock.
Hell, I've got some rear adjusters that are stuck at full height that I'll sell for cheap. They're in pretty shitty condition though, previous owner tried to cut through one of them and it's still seized.paint sucksComment
-
** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
up they go** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
Found these in the cabinet I was cleaning out today. Bump for an old thread.** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
-
** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment
-
I sent you a pm. Paypal is rkossol at comcast dot net** Lot's of M20 turbo parts for sale.**


Turn key track car.
http://www.r3vlimited.com/board/showthread.php?t=222066Comment

Comment