Perfectly Straight Valance, DS, G-260

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ck_taft325is
    R3V OG
    • Sep 2007
    • 6880

    #1

    Perfectly Straight Valance, DS, G-260

    Working Cluster with 7,000 rpm Tac, red painted needles. Bulbs should be replaced while it's out but worked when I pulled it - $50.00

    Borbet Type A's w/tires. Staggered setup, 16x7.5" front, 16x9" rear. Flat caps and front 3mm spacer included to clear calipers. These are not "perfect" but beautiful. Fronts have been resprayed, rears are still needing a bit of treatment. IMO, I would rate these 8/10 - $1,350.00 shipped
    (For $1,450 I'll include a pair of 8mm spacers to bump the rears out a bit)

    Pass. front:


    Pass. rear:


    Driver's front:


    Driver's rear:



    Straight Valance in drab olive green, ready for paint - $155.00 *SOLD*

    Drive Shaft from an '84 325e. Has junk yard markings on it from an '86 ES. No wobbles or bobbles, noise or play that I can see. Does need a new center support bearing as I removed the cracked old one - $100.00 + shipping

    G-260 5 speed manual, no noises. Shift linkage could use a rebuild, but it didn't bother me when I was driving on it at all - $100.00 + shipping

    All red tails w/reverse light. Done as a "keeping my hands busy" project in the slow economy - $100.00 + shipping

    Pictures do the best talking in these cases, so here's a few:












    Nearly everything else you can imagine off an '84 325e. Pictures upon request. Haggling is encouraged.
    Last edited by ck_taft325is; 03-17-2010, 04:02 PM.
    Need a part? PM me.

    Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123
  • Grif
    Wrencher
    • Sep 2009
    • 209

    #2
    Willing to ship a transmission?
    (would it work in a 89 325i?)
    My car eats bentley manuals.

    Comment

    • ck_taft325is
      R3V OG
      • Sep 2007
      • 6880

      #3
      IIRC it should work fine. I'd be willing but shipping costs would fall on you. I'd also probably crate it.
      Need a part? PM me.

      Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

      Comment

      • z31maniac
        I waste 90% of my day here and all I got was this stupid title
        • Dec 2007
        • 17566

        #4
        ^No need to crate it, just throw it in a plastic bin from Wal-Mart/Target and seal it shut.
        Need parts now? Need them cheap? steve@blunttech.com
        Chief Sales Officer, Midwest Division—Blunt Tech Industries

        www.gutenparts.com
        One stop shopping for NEW, USED and EURO PARTS!

        Comment

        • ck_taft325is
          R3V OG
          • Sep 2007
          • 6880

          #5
          Originally posted by z31maniac
          ^No need to crate it, just throw it in a plastic bin from Wal-Mart/Target and seal it shut.

          Good idea. Last diff. I shipped I sprayed a bunch of left over expanding foam into plastic bags on all sides of the diff. in it's box. Thing was solid and "light".
          Need a part? PM me.

          Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

          Comment

          • ck_taft325is
            R3V OG
            • Sep 2007
            • 6880

            #6
            Bump.
            Need a part? PM me.

            Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

            Comment

            • ruppcam
              Advanced Member
              • Mar 2009
              • 188

              #7
              have any pics of the valance??

              Comment

              • ck_taft325is
                R3V OG
                • Sep 2007
                • 6880

                #8
                PM'd.
                Need a part? PM me.

                Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                Comment

                • bmwsun
                  Grease Monkey
                  • Feb 2008
                  • 388

                  #9
                  PM Sent
                  M3 springs w/bilstein hd's, IE 22/19mm sway bars, front IE stress bar, complete suspension rebuild, IS interior.
                  Crew chief for BBQ2U Racing: James Crivellone, John Parker, Chris Anderson, Ben Wilson, George Howe, Will Kellog, Jim Cissell
                  BBQ2U Racing, Best of Intentions Racing

                  Comment

                  • Matt-B
                    The Waffler
                    • Jun 2009
                    • 3856

                    #10
                    valance early or late model?

                    I got a friend who needs one.


                    name is "mafiaracers"


                    Please leave feedback below, thanks

                    http://www.r3vlimited.com/board/showthread.php?t=358170

                    Comment

                    • ck_taft325is
                      R3V OG
                      • Sep 2007
                      • 6880

                      #11
                      Late model - Here's a picture. Please *note* it's drab olive green primer (flat army green color) ready for paint. NOT Primer black as it was in this picture:


                      SOLD.
                      Last edited by ck_taft325is; 03-14-2010, 03:29 PM.
                      Need a part? PM me.

                      Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                      Comment

                      • ck_taft325is
                        R3V OG
                        • Sep 2007
                        • 6880

                        #12
                        Slow down, fellow Forum members.

                        Bump.
                        Need a part? PM me.

                        Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                        Comment

                        • ck_taft325is
                          R3V OG
                          • Sep 2007
                          • 6880

                          #13
                          Bumpizzle.
                          Need a part? PM me.

                          Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                          Comment

                          • ck_taft325is
                            R3V OG
                            • Sep 2007
                            • 6880

                            #14
                            All red tails w/reverse light price drop - $100.00 + shipping

                            '86 ES drive shaft - $100.00 + shipping

                            '84 E 5 Speed transmission - $100.00 + shipping

                            Coupe doors in primer - $45.00 each or $75.00 for both
                            Need a part? PM me.

                            Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                            Comment

                            • Grif
                              Wrencher
                              • Sep 2009
                              • 209

                              #15
                              Shipping to 96789 on the g260?
                              I need one badly.
                              My car eats bentley manuals.

                              Comment

                              Working...