FS: Solid M20 Motor & Trans mounts.

[frankie591]

On the 24v swap mounts is there a tab that fits in the subframe hole to align the mount like on the normal green rubber mounts?

[silence]

On the 24v swap mounts is there a tab that fits in the subframe hole to align the mount like on the normal green rubber mounts?

No, there is no tab, its really not necessary to have one. THey only go in 1 way.

[frankie591]

No, there is no tab, its really not necessary to have one. THey only go in 1 way.

Ah okay. I was thinking that maybe the mount would want to twist, but I suppose once the mount is tightened down it cant really go anywhere.

[rhynolite]

Sent payment for M20 mounts - my passenger side completely sheared AGAIN. Just swapped a new one in last night and it failed on me at autocross today D:

[silence]

Sent payment for M20 mounts - my passenger side completely sheared AGAIN. Just swapped a new one in last night and it failed on me at autocross today D:

Damn! were they stock mounts? I had the same thing happen to me at an autox, that's what drove me to make mounts that wont break in extreme race conditions.

[E30Gus]

Got em. Thanks again man. Now I will have your mounts on the engine as well as the tranny mounts I installed a while back.

[silence]

Got em. Thanks again man. Now I will have your mounts on the engine as well as the tranny mounts I installed a while back.

Nice, and when your ready to do the subframe or CABs, let me know.

[E30Gus]

Nice, and when your ready to do the subframe or CABs, let me know.

Ha I got so tired of replacing my CAB's ~4 times so I ended up buying theTreehouse eyeballs. Had a horrible experience with the Power Flex CABs splitting on me. Brand new, never used, and trash.

[rhynolite]

Damn! were they stock mounts? I had the same thing happen to me at an autox, that's what drove me to make mounts that wont break in extreme race conditions.

Yep, stock rubber pieces. Looking forward to getting some that will outlast the car

[silence]

Ha I got so tired of replacing my CAB's ~4 times so I ended up buying theTreehouse eyeballs. Had a horrible experience with the Power Flex CABs splitting on me. Brand new, never used, and trash.

you wont have that problem with the condor CABs either :)

Yep, stock rubber pieces. Looking forward to getting some that will outlast the car

and they will :)

[eurotrash]

payment sent we'll see how they stand up to the 302 treatment

[silence]

payment sent we'll see how they stand up to the 302 treatment

you will be pleasantly surprised!

[eurotrash]

Anythings gonna be better then the box of dick rubber mounts in there now

[rhynolite]

Got em today.

Perdy (dunno why imgur cut the bottom off, oh well)


Out with the old..


In with the new!




I have to say I wasn't expecting this much of an increase in vibration, however I'm running a 3L stroker so the cam already made for a good shake/vibration that's now just amplified a bit. It feels like I'm sitting in a German muscle car now at stoplights... awww yeahhhh.

Thanks again!

[silence]

Anytime! Thanks for posting.
Btw, you are in a German muscle car!