FS: Corbeau Seat Brackets--

[rThor432]

I've got a pair of brackets for mounting Corbeau seats up for sale. I don't have any sliders though, but they should be a universal part. I'd like $85 shipped for the pair OBO. Sold!





Cheers,

Ryan

[E30_fiend]

so will these work without sliders? also, can you take some measurements so I can judge the mounted seat height. And with these, can you move the seat position forward and backward? or is it just one seated postition?

very interested





Taylor

[rThor432]

Taylor, I believe that you could mount seats directly to these, but I'm not positive. The seating postion would be fixed, however. It would be easiest if you used these with sliders. With a some metal and a welder you could modify them to position the seat wherever you would like while retaining the low seating position. The total height of the bracket is 1 1/4". With the sliders it is roughly a 2" stack height iirc. I had these with old Corbeau GTS seats and I sat a good bit lower in the car than with stock sport seats.

[rThor432]

Bump for someone out there needing these more than me! Make an offer guys.

[stevofthahill]

Any idea if these would work with sparco sliders? If so, you can consider them sold.

[rThor432]

Hey-- They are almost a perfect fit on the Sparco sliders. Two holes will require a slight elongation with a dremel or similar method--

This is with the Sparco sliders lined up with the mounting points I used with my old GTS seats/sliders combo--


Bottom hole lined up with the elongated hole on the slider; works fine--


The other hole that will require modification--


After taking the pictures I realized it would be better to line up the two ends that have fixed holes and dremel the seat mount bracket where the elongated hole in the slider is. Anyway, they'll work with minimal effort. If you'd like I can modify/slot those holes and prime/paint the bracket for you based on the Sparco slider's I've got here for $5-10. Let me know what you think.

Thanks,

Ryan

[stevofthahill]

pm sent...

[th3blue]

I just can't win... I missed a set of this a couple weeks back, paid retail, and now this comes up for for sale. I don't even need sliders since I already have them.

sucks for me, good deal for somebody else on here.

[rThor432]

sucks for me, good deal for somebody else on here.

Sorry to hear that! But either way, I'm sure you are glad to finally have all of the parts together to get the seats in the car.. Full price or not it's a good feeling to have a fresh set of sport seats in your car.

These are sold guys, thanks!

[fiftytakedowns]

where do you find them anyways?

[rThor432]

where do you find them anyways?

These brackets? They can be purchased through any Corbeau vendor. One of our board sponsers can probably get you a set. Bimmerworld should have them as well. IIRC they are $90 per bracket new plus $40 per pair of sliders (2 pair are needed).

[th3blue]

you can also contact corbeau directly -- the price is fixed so it will be the same everywhere.