M20 Forged Crank, 10.2 to 1 Euro eta Piston, & new bearings

[germancarsonly]

-=SOLD=- This is a forged crank from a 524td. It's Std. - Std. The pistons are the Euro 2.7 eta ones with 10.2 to 1 compression and they are .50MM oversize. You can have the overbored block if you come and get it off an engine stand in my garage. The block is great, I just don't want to ship it. I'll throw in the pan and oil pump also. New main & rod bearings are standard. New rod bolts are included. The rings are fine.

These pistons are supposed to make 9.35 to 1 when used with the 885 m20B25 head. Or 10.2 to one with a 200 head or a 731 head. I will be selling a 731 head soon probably.

The crank is $300 with the new bearings + shipping. The pistons with the new bearing and rod bolts are $400 + shipping. Or buy everything for $600 + shipping. Don't waste your time asking if I will sell the parts without the bearings and bolts - No, I won't.

Please, don't PM me. I am on many different computers and I can only log into this forum from one. Simply use the link to my e-mail - germancarsonly@gmail.com

[Myster-E]

Thats bitchen!

[der affe]

this is what everyone needs to make a good solid N/A 2.7i stroker motor! very hard to come by these pistons anymore.

free bump!

[germancarsonly]

Yes, these are some good parts. I bought the engine 100% complete and tore it down to do new bearings and seals that weren't needed as it was a fresh rebuild probably, but I didn't know the history. I'm pretty sure it was an MK-Motorsports 2.7i from Germany. The cam, the headers and the extrude honed intake all are MK parts. The car had MK springs, sway bars, MK/Bilstein shocks & struts. I e-mailed them to get more info and didn't hear back from them. I had Andreas Koretel e-mail them in German and no answer then either. So I wasn't able to verify anything or even get the specs for the cam. The head and cam will be for sale soon too. I have way too many projects and I am letting go of this one.

[germancarsonly]

^

[Luis325]

Bump for some Sexy parts and a great seller!

[e30gentry]

If i wasn't on the other side of the country i would get this now!

[germancarsonly]

^

[germancarsonly]

^

[e30ne21]

Part # on pistons? It's stamped under piston top near wrist pin.

[germancarsonly]

Mahle 84V114 R021

[germancarsonly]

^

[e30ne21]

The real deal people from Mahle below. A good buy for someone.



BMW, petrol 84 M 20 B 27 ME.E,
R 6 petrol, 2693 cm³, 92 - 95 kW (125 - 129 PS), 10,2:1


KH 35,7 VT 1,99 MT 0,9 MV 1 MØ 59 GL 77,7 22
x
54 R 1,5 IF Cr NM 2 G 4 84,50 082 54 02
84 V 114

[germancarsonly]

Yes, folks this is the real deal. I wouldn't try and pass parts off that weren't what I say they are.

I'll work out delivering the block and other pieces to anyone on the West Coast.

[e30 sdw]

Payment sent!!!
Thanks