m20 "731" head

[Deutschland über alles]

im selling a 731 head out of a 323i. the cam has a flat spot in one of the lobes! could still be used or reground. i have rockers, (minus 1! broke) and values.
i also have the afm and the cover, i don't have the intake.
make me an offer,you would have to pay shipping.
i will trade for things too.

[Stephen]

Where are you/ what are you looking for?

[Deutschland über alles]

already sold. sorry

[Tsweers89]

damn

[Deutschland über alles]

the guy who said he wanted it might have flaked (no call back). here is more pictures too. the cam isn't horrible, i don't have a micrometer for exact measurements, out of shape, maybe 1/32 to 1/64'th, maybe?at the high point. when i got it the guy said the rocker that was on the lobe (the contact point) fell off. so it doesn't have 1 of the rockers. the springs i have, you'll still want new ones 23+ years old($20 on ebay). the valve look good needs cleaned.
the afm is from the same 323i the head came off off.
i looked into having the cam reground, it was cheaper than a new one, i dont remember the quotes, but i do remember the regrind was a hell of a lot cheaper.
all the innards are in numbered bags.

[Deutschland über alles]

bump

[KillaCam]

ill give you 150 shipped i bought mine for 175 picked up all together in perfect re furbished condish

[Danny]

Post a price.

[germancarsonly]

By not posting a price on this 731 head you are just killing your chances of getting a good sale. I have sold a few of these and I always get at least $400 + shipping, but they were nice heads with good cams. One that I sold that was fresh from the machine shop went for a little over $800.

You might want to mention that installing the larger valves and seats from the 885 head is a simple upgrade any Bozo at a machine shop can do. And port matching the intakes to match the M20B25 intake is easy, less than an hour with a simple die grinder.

[Deutschland über alles]

By not posting a price on this 731 head you are just killing your chances of getting a good sale. I have sold a few of these and I always get at least $400 + shipping, but they were nice heads with good cams. One that I sold that was fresh from the machine shop went for a little over $800.

You might want to mention that installing the larger valves and seats from the 885 head is a simple upgrade any Bozo at a machine shop can do. And port matching the intakes to match the M20B25 intake is easy, less than an hour with a simple die grinder.

here is my price $200 o.b.o. the box weighs 54.4lbs and it will be shipped from 98236,you pay for shipping. its been at my summer house for years now i would like it gone, before i get shipped out.

[acolella76]

By not posting a price on this 731 head you are just killing your chances of getting a good sale. I have sold a few of these and I always get at least $400 + shipping, but they were nice heads with good cams. One that I sold that was fresh from the machine shop went for a little over $800.

You might want to mention that installing the larger valves and seats from the 885 head is a simple upgrade any Bozo at a machine shop can do. And port matching the intakes to match the M20B25 intake is easy, less than an hour with a simple die grinder.

Just out of curiosity, I often hear that it's super easy to get 885 valves fitted to the 731 head. But doesn't the 731 head have the same valves as the eta 200 head, meaning it would be just as feasible to fit the 885 valves into the 200 head?

[Deutschland über alles]

its all about the cam, 731 cam is the "hottest" cam you can get for the m20, this cam needs to be reground. i was going to do that, and put it in my e car, i travell alot and decided to much work, i have 3 e30 and a couple other cars, next e30 that goes out im putting a m30 in it. the stroker would be badass though, my time is limited to what projects i can do, its been in my garage for years now and i havnt done anything with it yet, so...time to go

[KillaCam]

150 shipped?

[bottlerocket]

Do you still have the AFM? And what's the Bosch # on it?