Two items here. Going a little ways back with some car audio...
Amp/Subs/Box - $75 obo
I never really used these. I got it from a friend of mine who used it years ago but I never had the motivation to install it in any of my cars. It is just taking up space in the garage now. A little dirty from being in the garage but it should clean up.
Included are 2 JBL subs, a Blaupunkt Amp and a sub box (not sure of brand?).
Subs:
- 2x 10" JBL "GT Series" - I've tried to find info online but could not. I might pull them out later though to get the exact model number.
Amp: Blaupunkt PA2100
From Crutchfield.com: http://www.crutchfield.com/p_023PA21...=detailed_info
Big sound from a small package — Blaupunkt's PA2100 amplifier is simply amazing! Blaupunkt uses innovative Class "T" technology to create an amp with incredible power and sonic fidelity.
The PA2100's highly-efficient operation gives you two installation advantages: an extremely small footprint (mounts just about anywhere without sacrificing cargo space), and very little heat generation (fits in tight spaces without overheating). Thanks to the low operating temperature, Blaupunkt's designers can house this stylish amplifier in sleek, modern-looking, lightweight plastic.
Built-in crossovers send the right frequencies to the right speakers, and a subsonic filter eliminates energy-wasting inaudible frequencies for improved clarity.
Details:
- 100 watts x 2 at 4 ohms
- 150 watts x 2 at 2 ohms
- 300 watts x 1 in bridged mode
- Stereo or bridged mono output
- Tri-way capable (Tri-Way crossover required)
- Requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- Class "T" amplifier technology
- MOSFET power supplies
- Includes blue, red, orange, yellow, purple, and smoke colored lenses to cover controls on top of the amp
- Speaker-level input adapters
- Preamp outputs
- 50-250 Hz variable high- and low-pass crossovers, 12 dB/octave
- Selectable 10 dB bass boost at 45 Hz
- Subsonic filter at 10 Hz eliminates energy-wasting inaudible low frequencies
- Remote gain control
- 9"W x 2-3/4"H x 7-9/16"D
- Amp can be removed from plastic chassis for a hideaway installation (dimensions without chassis: 8-3/4"W x 2"H x 5-7/8"D)






Pioneer GM-x352 Amp: $30 PENDING SALE
I've had this amp for ages and never used it. It is in great shape, works great and is more than enough for a conservative system where a smaller amp is needed.
From Pioneer's Site: This is high performance in a smaller package. Though just over 6" deep, the GM-X352's PWM MOSFET power supply that delivers 200 Watts (peak) of smooth, efficient power at low distortion, for excellent musicality. It offers the flexibility of bridging power into 1, 2, or 3 channels, depending upon your system configuration, and screw-type power/ground and speaker terminals.
Specifications
Continuous Power (14.4V): 40Wx2 (4ohm), 50Wx2 (2ohm), 100Wx1 (4ohm)
Max Power (14.4V): 80Wx2 (4ohm), 200Wx1 (4ohm)
Frequency Response: 10Hz - 50kHz (0,-1dB)
Total Harmonic Distortion: 0.008% (1kHz, 4ohm)
Signal-to-Noise Ratio: 100dB (IHF-A)
Dimensions: 11" x 2-5/16" x 6-3/16"
Features
PWM MOSFET Power Supply
Bridgeable 1/2/3 Channel Capability
Balanced Isolator Input Circuit
Screw-Type Power/Ground Terminals
Screw-Type Speaker Terminals
RCA Inputs
Hi-Volt Input Level Control (400mV-6.5V)
Molex Type Speaker Level Inputs
Selectable LPF: 80Hz, -12dB/oct. (LPF)




All of these items should be in prefect working order. If for ANY reason they are not I will be more than happy to refund any and all payments.
If you have any questions please let me know!
-Putter
Amp/Subs/Box - $75 obo
I never really used these. I got it from a friend of mine who used it years ago but I never had the motivation to install it in any of my cars. It is just taking up space in the garage now. A little dirty from being in the garage but it should clean up.
Included are 2 JBL subs, a Blaupunkt Amp and a sub box (not sure of brand?).
Subs:
- 2x 10" JBL "GT Series" - I've tried to find info online but could not. I might pull them out later though to get the exact model number.
Amp: Blaupunkt PA2100
From Crutchfield.com: http://www.crutchfield.com/p_023PA21...=detailed_info
Big sound from a small package — Blaupunkt's PA2100 amplifier is simply amazing! Blaupunkt uses innovative Class "T" technology to create an amp with incredible power and sonic fidelity.
The PA2100's highly-efficient operation gives you two installation advantages: an extremely small footprint (mounts just about anywhere without sacrificing cargo space), and very little heat generation (fits in tight spaces without overheating). Thanks to the low operating temperature, Blaupunkt's designers can house this stylish amplifier in sleek, modern-looking, lightweight plastic.
Built-in crossovers send the right frequencies to the right speakers, and a subsonic filter eliminates energy-wasting inaudible frequencies for improved clarity.
Details:
- 100 watts x 2 at 4 ohms
- 150 watts x 2 at 2 ohms
- 300 watts x 1 in bridged mode
- Stereo or bridged mono output
- Tri-way capable (Tri-Way crossover required)
- Requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- Class "T" amplifier technology
- MOSFET power supplies
- Includes blue, red, orange, yellow, purple, and smoke colored lenses to cover controls on top of the amp
- Speaker-level input adapters
- Preamp outputs
- 50-250 Hz variable high- and low-pass crossovers, 12 dB/octave
- Selectable 10 dB bass boost at 45 Hz
- Subsonic filter at 10 Hz eliminates energy-wasting inaudible low frequencies
- Remote gain control
- 9"W x 2-3/4"H x 7-9/16"D
- Amp can be removed from plastic chassis for a hideaway installation (dimensions without chassis: 8-3/4"W x 2"H x 5-7/8"D)






Pioneer GM-x352 Amp: $30 PENDING SALE
I've had this amp for ages and never used it. It is in great shape, works great and is more than enough for a conservative system where a smaller amp is needed.
From Pioneer's Site: This is high performance in a smaller package. Though just over 6" deep, the GM-X352's PWM MOSFET power supply that delivers 200 Watts (peak) of smooth, efficient power at low distortion, for excellent musicality. It offers the flexibility of bridging power into 1, 2, or 3 channels, depending upon your system configuration, and screw-type power/ground and speaker terminals.
Specifications
Continuous Power (14.4V): 40Wx2 (4ohm), 50Wx2 (2ohm), 100Wx1 (4ohm)
Max Power (14.4V): 80Wx2 (4ohm), 200Wx1 (4ohm)
Frequency Response: 10Hz - 50kHz (0,-1dB)
Total Harmonic Distortion: 0.008% (1kHz, 4ohm)
Signal-to-Noise Ratio: 100dB (IHF-A)
Dimensions: 11" x 2-5/16" x 6-3/16"
Features
PWM MOSFET Power Supply
Bridgeable 1/2/3 Channel Capability
Balanced Isolator Input Circuit
Screw-Type Power/Ground Terminals
Screw-Type Speaker Terminals
RCA Inputs
Hi-Volt Input Level Control (400mV-6.5V)
Molex Type Speaker Level Inputs
Selectable LPF: 80Hz, -12dB/oct. (LPF)




All of these items should be in prefect working order. If for ANY reason they are not I will be more than happy to refund any and all payments.
If you have any questions please let me know!
-Putter

Comment