M42 and Random Parts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 318isbmw
    Moderator
    • Nov 2005
    • 2841

    #1

    M42 and Random Parts

    M42 Upper Intake - $40 shipped

    IMG_3921
    M42 Lower Intake - $35 shipped
    Or $65 for the both

    IMG_3922
    M42 Throttlebody - $20 shipped

    IMG_3923
    M42 ICV - $20 shipped

    IMG_3925
    Thermostat Housing - $10 shipped
    M42 Airbox - $35 shipped

    IMG_3926
    M42 ECU - $35 shipped
    M20 Single Mass Flywheel and Starter - $50 – Local Only (Seattle Area)

    IMG_3928
    M42 Wiring Harness Center Cover - $15 shipped

    IMG_3927
    OBD2 Fuel Rail - $15 shipped
    M42 Injector Set with Rail - $25 shipped
    M42 Lifter Set - $40 shipped
    M42 Cams with Trays - $50 local only
    Cams had oil starvation for a brief time so has scoring on 2 of the bearings, and rust on several lobes from sitting in the garage. These are 5 degree cams; they are unknown spec but ran great with stock tune but are 5 degrees off of stock to allow more aggressive timing.

    IMG_3955
  • 318isbmw
    Moderator
    • Nov 2005
    • 2841

    #2
    Bump! Make me offers as I need this stuff out of the garage.

    Comment

    • Stephen
      Шлем ишака
      • Aug 2008
      • 10774

      #3
      i think i want the m42 cover. Its the one that on non m42 cars covers up alot of the firewall right?

      Comment

      • 318isbmw
        Moderator
        • Nov 2005
        • 2841

        #4
        Originally posted by Stephen
        i think i want the m42 cover. Its the one that on non m42 cars covers up alot of the firewall right?
        Yep, this would be the one. It was used on my m50 swap as well as the m42. You'll need the one that attaches to the firewall as well as this one snaps onto it, that one broke when installing an m50 so I don't have it anymore, but I had this ziptied on to cover the wires for a while.

        Comment

        • Stephen
          Шлем ишака
          • Aug 2008
          • 10774

          #5
          Originally posted by 318isbmw
          Yep, this would be the one. It was used on my m50 swap as well as the m42. You'll need the one that attaches to the firewall as well as this one snaps onto it, that one broke when installing an m50 so I don't have it anymore, but I had this ziptied on to cover the wires for a while.

          Snaps on to the piece i already have on my eta or is there something else i need?

          Comment

          • 318isbmw
            Moderator
            • Nov 2005
            • 2841

            #6
            Originally posted by Stephen
            Snaps on to the piece i already have on my eta or is there something else i need?
            No, it snaps onto the other m42 part.

            http://www.realoem.com/bmw/showparts...51&fg=20&hl=42

            Comment

            • Stephen
              Шлем ишака
              • Aug 2008
              • 10774

              #7
              Ohh gotcha.

              Comment

              • 318isbmw
                Moderator
                • Nov 2005
                • 2841

                #8
                Bump! I'll get the pictures rehosted tonight but everything's in good shape and no issues. Make offers and I just might accept to get it out of the garage.

                Comment

                Working...