Socal-24v Swap Parts, 5 lug parts, vaders, and etc.

[e46s54dr]

I have some parts that are just filling up precious space in my man cave. All prices are obo and without shipping. I will post up the pictures Asap. Feel free to pm me any questions or offers. Local pickup is always preffered. Im located in socal Highland, Ca. 92346.

Red Label 413 dme - 80
E34 Non-vanos m50 wiring harness with fuel rail - 75
Obd1 m50 intake manifold ( has a small chip where the gasket ring sits that could be siliconed) - 30
Obd1 throttle body witout tps - 30
Front 95 m3 strut assembly complete with hubs, spindle, rotors, calipers, sensors, lca, offset bushings - 175 for both
Rear m3 calipers and rotors - 75 for both
95 m3 3.15 lsd with 99k - 175
Dove grey manual heated vaders (needs to be reupolstered) - 250
Oem 17" ds1 wheels with junk tires. No bends but has some small rashes - 250
Rear e36 m3 bumper. Needs paint - 50
E36 m3 sideskirts. Needs paint - 50

[jahnaboi]

PM'd.

[e46s54dr]

Replied

[darrenforeal]

are the rear calipers and rotors off an E36? or are they 4 lug that would fit an E30?

[Kev]

pmd

[e46s54dr]

All the suspension components are from an e36 m3. The front strut assembly can be used for an e30 5 lug swap but you'll need the control arms from a 97+ m3 to get the alignment within spec. I believe the Rear calipers should fit over the rear e36 ti rear 5 lug but don't hold me to it.

[Mossman]

not sure whether real calipers bolt up but the rotors don't work on a Ti. Your prices are great though, wish I was close enough to pick up a bunch of the tough to ship stuff

[e46s54dr]

not sure whether real calipers bolt up but the rotors don't work on a Ti. Your prices are great though, wish I was close enough to pick up a bunch of the tough to ship stuff

Thanks for the comment. I don't plan on using any of these parts so I figured I sell them to someone that wants them for a good deal.

[pilotskillse30]

are those lower control arms off a 97 m3 or higher, if so I could be interested in the front package.

[e46s54dr]

No, the control arms are from a 95 m3. They're pretty much useless unless you have an e36 that you're looking to upgrade.

[e46s54dr]

Okay guys, my stoneage computer just isn't cutting it anymore so I won't be able to get the pics up anytime soon while my new one is being built. I can send you pictures via picture messaging on my set phone if desired.

[F34R]

I sent a PM, awaiting reply.

[e46s54dr]

17" ds1's and front e36 m3 suspension is sold. Everything else is availiable, throw me some offers if you need any of it.