Custom Hub Centric Adapters and Spacers

[Eurohb]

The company I am associated with has given me the opportunity to offer there services to forums for an amazing price. We specialize in Custom Adapters, Spacers, Hub Centric Rings at rates better then most competitors out there.

Custom Adapters Start at $100 A PAIR SHIPPED! That's right a pair shipped to your door step.

Custom Conversion adapters also offered.

Each and everyone of our spacers or adapters are made of T6 6061 Aluminum alloy, every set we ship out comes with hardware ready to install and go.

Spacers and adapters are all HUB CENTRIC made to exact spec of your vehicle or spec your require.

Adapters we usually start making them from 17mm on up HUB CENTRIC.
Spacers and size you need HUB CENTRIC.

Examples of our products
E39 10mm hub centric spacers (made for paintballistic BF.C member)


Subaru 5x114.3 hub centric Spacers



5x100 to 5x114.3 17mm conversion adapters




Testimonials from other members on sites

http://www.wrongfitmentcrew.com/foru...d-Hub-Adapters.

http://www.stancenation.com/forum/viewtopic.php?f=11&t=1202

http://forums.bimmerforums.com/forum/showthread.php?t=1578410

Ordering
- When placing a order, fill this out.
Year Make Model
Spacer or adapter
Thickness
Zip Code.
Paypal

Email me or PM me with any questions or inquires.
PAYPAL only located in Fontana /Baldwin Park.



To everyone inquiring about 4x100 to 5x120 adapters!!!

Please note until we have a 100% sure adapter that is made, we will not be taking request for them at this time. Please stop pm'ing asking about pricing and request! When the adapter is made i will announce it and as well with the prices.

[RSGM]

Can you do 4x100 ---> 5x130? in 40mm or so?

[Eurohb]

Can you do 4x100 ---> 5x130? in 40mm or so?

SURE CAN!

What inlet bore (e30 I Pressume) to 5x130 bored and thread pitch.

[TurboMeTroy]

What do a set of 4x100 --> 5x120 run? :)

[Eurohb]

product still under prototype

[ck_taft325is]

If you can do a full set (4 total) of 4x100 to 5x120 adapters in 17mm-20mm at $145, I'll take a set in a couple weeks.

[Eurohb]

Forsure guys lmk

[evoDRichie]

damn good deal.... i might take a set just in case i find some rims for that price!

[Cha Ching]

What's the time frame to fab & deliver a set of adapters? Minimum thickness to go from 4x100 to 5x120 is 17mm?

How much just for a set of hub centric rings? Say 72.6mm - 57.1mm?

[Fidhle007]

A pair of 15 or 20mm E30 spacers. With bolts. How many monies?

[e30lov]

I need:

2) 4x100 57.1cb 8mm hubcentric spacers
2) 4x100 57.1cb 10mm hubcentric spacers

Do you guys have extended lug bolts?

[Eurohb]

damn good deal.... i might take a set just in case i find some rims for that price!

Cool let me know :D

What's the time frame to fab & deliver a set of adapters? Minimum thickness to go from 4x100 to 5x120 is 17mm?

How much just for a set of hub centric rings? Say 72.6mm - 57.1mm?

Check pm's in a few

A pair of 15 or 20mm E30 spacers. With bolts. How many monies?

Our spacers and adapters come with the same style as ichiba usa. So we recommend the stud conversion, but i my self have an extra set of 20mm lugs i can give you for no cost. $120 shipped for 20mm spacers hub centric. PM Me

[Eurohb]

I need:

2) 4x100 57.1cb 8mm hubcentric spacers
2) 4x100 57.1cb 10mm hubcentric spacers

Do you guys have extended lug bolts?

8mm hub centric and 10mms we can do hub centric, but where the wheel sits on the spacer (outlet) is too thin to make a piece so it will look like this for a 8mm

http://www.ichibausa.com/8mmalwhsp1.html

but 10mm i can make with a hub centric with a lip on the outside where the wheels sits on the spacers.

I can see about the extended lug bolts, but we usually recommend stud conversions. I can most likely get u the lugs, Spacers for all four $110 shipped without lugs. PM me for some info please.

[TurboMeTroy]

If you can do a full set (4 total) of 4x100 to 5x120 adapters in 17mm-20mm at $145, I'll take a set in a couple weeks.

65 x 2 = $130

If this is so, I'll take a set too. right now, actually.
2x 20mm
2x 25mm

Tell me where to send the money. I'm excited!

Thanks,
Troy

[ÜberslowETA]

You have a PM =)