Parting out 86 325e black/houndstooth

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NbAmTwE
    Advanced Member
    • Jul 2010
    • 148

    #1

    Parting out 86 325e black/houndstooth

    As it says folks black with houndstooth sedan interior, will post up pictures soon. They are nowhere near perfect but the drivers and rear seats are in real good shape with some minor smoke marks from PO. The dash is all cracked up so unless you want that it's pretty much N/A. All the panels are good. ECU and whole drivetrain for sale except wiring harness (using for 2jz swap) and driveshaft. The other items I know I can't sell are hood/trunk/fenders, driver's seat belt, overhead sunvisor area.
    I'm located in Conway, AR 72032 so all items are OBO, willing to separate anything *engine* just to sell the part. Shipping is of course at buyers expense and I can do what I can to help arrange it. Please PM or e-mail me for parts availability or pictures showing condition of parts. Offer a price and provide zip if you need shipped so I can give you my final price.

    here is link to bf.c ad where I have been a member for quite some time if that helps ease anyones minds to know they can buy with confidence.

    Here is my flickr set with some photos and more to come...
    http://www.flickr.com/photos/nate-bm...7625840389496/
    Pricing does NOT include shipping, PM or e-mail me for shipping arrangements


    What is out of the car and ready to go:

    BTW- HVAC system was never used, previous owner stated it worked fine but I can't guarantee, looks like it had been leak tested recently with the dye showing on the tap. If for some reason a part is not working I will do what I can to refund within a reasonable time, so that you may install and test out.

    Heater core (no leaks) $35
    Heater core to firewall lines (return and flow) $8 [or $5 more with heater core]
    AC lines from HVAC to compressor
    Blower motor - I'll know for sure after cleaning but seems in good condition $25
    stock 4 spoke steering wheel non-airbag (w/ emblem cap) $20
    M20B27 ICV (engine ran fine and idled well) $40
    M20B27 Airbox (no filter) $30
    coolant hoses available by request - some show wear like expanding - some don't | $2 each plus shipping
    Most small interior bits available - some are broken - everything is out with the exception of needed to operate bits

    All for now, will post more when there is more pulled. It will slowly all be out but I will pull whatever you like first. The engine is going to be broken down and sold into parts since there really isn't anyone local that would want anything other than the block.
    Last edited by NbAmTwE; 02-01-2011, 10:09 PM.
    UNDER CONSTRUCTION - 24v 325e (future DD), DD 525i


    stripped out e30 rally project - in progress
    M50NV -> M50TU E34 swap underway
  • NbAmTwE
    Advanced Member
    • Jul 2010
    • 148

    #2
    TTT
    updated first post
    UNDER CONSTRUCTION - 24v 325e (future DD), DD 525i


    stripped out e30 rally project - in progress
    M50NV -> M50TU E34 swap underway

    Comment

    • Horton
      Noobie
      • Oct 2010
      • 16

      #3
      I need the piece that bolts to the pass side of the intake that the cold start injector bolts to and the air valve hose goes to. Got a price shipped to 08081? Thanks a lot!

      Comment

      • ruqknuf
        Grease Monkey
        • Jul 2009
        • 378

        #4
        PM sent
        sigpic

        Leave Feedback here:

        http://www.r3vlimited.com/board/showthread.php?t=261541

        Comment

        Working...