Made by Motorsport-Tech, absolutely perfectly made, the only reason for the sale is my change of motor plans. I'm going to run the same wheels, but need thinner adapters so I can get some more rubber on the ground.
5x114.3 -> 4x100, 57.1mm hub on car side, 60.1mm hub on wheel side. These are the 1 piece design, with a floating slug and come with all necessary hardware to mount the adapters to the car and the wheels to the adapters.
(2) 35mm adapters
(2) 30mm adapters
Basically these are perfect for something like a 8/9" front to rear stagger if the wheels have an offset around 40. I purchased these adapters to run a setup like this with Yokohama S-drives.
17x8 ET 43, 195/45/17 <- ET 8 with 35mm adapters
17x9 ET 40, 215/40/17 <- ET 10 with 30mm adapters
That gets you a nice flush setup, with even moderate stretch, front to rear, with a good performing tire.
$350 shipped for all 4 within the lower 48 States.
I will separate at $175/pr if there are buyers for each pair.
I will post pictures this evening when I get home.
5x114.3 -> 4x100, 57.1mm hub on car side, 60.1mm hub on wheel side. These are the 1 piece design, with a floating slug and come with all necessary hardware to mount the adapters to the car and the wheels to the adapters.
(2) 35mm adapters
(2) 30mm adapters
Basically these are perfect for something like a 8/9" front to rear stagger if the wheels have an offset around 40. I purchased these adapters to run a setup like this with Yokohama S-drives.
17x8 ET 43, 195/45/17 <- ET 8 with 35mm adapters
17x9 ET 40, 215/40/17 <- ET 10 with 30mm adapters
That gets you a nice flush setup, with even moderate stretch, front to rear, with a good performing tire.
$350 shipped for all 4 within the lower 48 States.
I will separate at $175/pr if there are buyers for each pair.
I will post pictures this evening when I get home.