m20b25 ~170k miles
Oil Changed every 3k with Castrol GTX 10w 40 since 11/09
Originally mated to an Automatic transmission until 7/10
Includes:
Working Power Steering Pump and AC Compressor and associated belts
All sensors
Recent Maintenance:
(Performed between 11/09 - 6/10)
Spark plugs (Bosch Silver)
Distributor cap and rotor (Bosch)
Crank Position Sensor (Meyle)
Air Intake elbow
Intake Manifold Gaskets replaced
Injectors removed and cleaned, new o rings installed
Valve Cover Gasket replaced
Crank Case Ventilation Hose replaced
Throttle Body Coolant Gasket replaced
Timing Belt replaced
Water Pump replaced
Engine ran very well until March 2011, timing belt snapped, one rocker was discovered broken in the valve train. This motor would be a great candidate for a N/A stroker rebuild or forced induction application. The reason I am selling is because I was able to source a 24v motor and decided to swap rather than fix this motor. Considering the condition of the motor and the amount of near new parts, Best offer takes it, for sake of the rules lets say $200. Also have a working AFM from the same car that I can include for another $50.
Next is my m20 skidplate, it has seen some wear but it is still a solid piece and would still be on my car if it fit the e34 oil pan (it doesnt... at all) $150 obo
I also have a g260 in need of a new output seal and a drive shaft. If anyone is interested I can post pictures of those items as well.
Not interested in shipping
Oil Changed every 3k with Castrol GTX 10w 40 since 11/09
Originally mated to an Automatic transmission until 7/10
Includes:
Working Power Steering Pump and AC Compressor and associated belts
All sensors
Recent Maintenance:
(Performed between 11/09 - 6/10)
Spark plugs (Bosch Silver)
Distributor cap and rotor (Bosch)
Crank Position Sensor (Meyle)
Air Intake elbow
Intake Manifold Gaskets replaced
Injectors removed and cleaned, new o rings installed
Valve Cover Gasket replaced
Crank Case Ventilation Hose replaced
Throttle Body Coolant Gasket replaced
Timing Belt replaced
Water Pump replaced
Engine ran very well until March 2011, timing belt snapped, one rocker was discovered broken in the valve train. This motor would be a great candidate for a N/A stroker rebuild or forced induction application. The reason I am selling is because I was able to source a 24v motor and decided to swap rather than fix this motor. Considering the condition of the motor and the amount of near new parts, Best offer takes it, for sake of the rules lets say $200. Also have a working AFM from the same car that I can include for another $50.
Next is my m20 skidplate, it has seen some wear but it is still a solid piece and would still be on my car if it fit the e34 oil pan (it doesnt... at all) $150 obo
I also have a g260 in need of a new output seal and a drive shaft. If anyone is interested I can post pictures of those items as well.
Not interested in shipping
Attached Files
Comment