Announcement

Collapse
No announcement yet.

Buy this stuff! Zender valence, springs etc.*update 8/8/11*

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Buy this stuff! Zender valence, springs etc.*update 8/8/11*

    I need to reclaim my garage and parts trailer as the amount of parts I squirrel away is getting rediculous. I'm going to venture deeped and deeper each night so I'll be adding parts as the days go on.

    For now:

    Eibach coilover springs:
    - two 6" 2.5"ID 750lb springs, about 700 miles on them $100
    - two 6" 2.5"ID 350lb (?) springs, many miles on them, slightly rusty but aren't sagging $70
    - two 5.5" barrel springs (rear) 450lb (?), many miles, rustier than the fronts $50 pending

    The 2 springs on the right are the 6x2.5x750 with 700 miles. Nothing else in this picture is for sale. Not even the chipotle cup.


    750lbers, they're just dusty


    350lbers, not as bad as they look


    Early model Behr radiator for 325e:
    about 5000 miles on it, bought it new for my old car then pulled the engine for an M30. Not corroded or brittle, ran prestone and distilled in it for the little while I had it. $50

    Zender plastic bumper valence:
    Bought this for my black car but found out it doesn't fit under my bumper at my height. Had cracks when I bought it, I've started welding them back together. It's painted Delfin right now but it's very rock chipped. $250 in the shape it's in now, $350 after I fix the cracks, sand it fairly smooth and primer it.


    The sanded spot is the only crack I've repaired so far







    M50 manifolds
    - one with injectors attached. Slight fading starting to happen $70
    - No injectors, fading on top. Has a 2 prong plug to the right of the throttle body. No idea what its for. $65





    Late model brake duct tubes
    - left and right, $5 each

    179 ECU
    - $35

    m42 upper oil pan
    - $50

    e34 m30 oil pan
    - $75

    M30 Valve cover
    - $25

    Leather ebrake handles
    - e39, $15
    - 3 e34, $12 each

    Early model taillights
    - left and right I believe, with bulb holders. $20 each

    Painted front diving board surrounds
    - painted diamond schwarz, slightly wavey. From an 88 I believe. $10 per side

    Stock airboxes
    - M20 eta $15
    - e34 m30 $20

    Washer bottle
    - not too faded, no cracks. $15

    e32/4 coolant tanks
    - 2, both yellow with age. $15 each

    M30 alternator
    - Pretty much new, used for about 500 miles before engine blew up. $75

    e28 parts
    - blue passenger door panel. $15
    - blue center console $10
    - blue ebrake console $7
    - blue leather rear seat bottom. Pretty faded, no cracks or tears. $20

    e34 parts
    - passenger side fog light. Good shape, very light pitting. $20
    - 540i rear view mirror. $17
    - wood dash parts. Only have what's in the picture. Pretty good shape. $15









    *More parts and pictures to come*


    Prices are OBO and without shipping. I'm interested in trades as long as it's something interesting and not the 4 spoke wheel you took off your car or your old diving boards.
    Last edited by E30SPDFRK; 08-11-2011, 04:22 PM.
    Byron
    Leichtbau

    #2
    O
    Originally posted by E30SPDFRK View Post
    I'm interested in trades as long as it's something interesting and not the 4 spoke wheel you took off your car or your old diving boards.
    you disclaimer should be part of every seller or buyer's sig. It's so gangster............lmao
    @IRON-E30 aka Edwin:D

    Comment


      #3
      Why couldn't yu buy 5" 750lbs in rear and sell those =\ glws

      "Hard Work Pays Off"



      1991-bmw 325i (R3vvd)
      1990- 325 (mpowa)(GC)(track)(beast)
      1988- 528e (daily driven when track car broken)

      Comment


        #4
        Heh, I had a set of 4" 800lb springs for sale a while back but they sold :(


        Bump for more stuff added
        Byron
        Leichtbau

        Comment


          #5
          Bump
          Byron
          Leichtbau

          Comment


            #6
            Hey, I bought your 800lb rear springs ;) Fantastic seller. So the 750lb springs are for the fronts? Don't suppose you have some rear adjusters kicking around?
            Need a part? PM me.

            Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

            Comment


              #7
              Thanks man, yeah the 750's are for fronts.

              I have a broken adjuster collar and a partially cut adjuster with a trailing arm nub corrosion-welded to the inside lol. Pay for shipping and it's yours ;)
              Byron
              Leichtbau

              Comment


                #8
                Bump, too lazy to go to my garage to find more parts so buy these and get me motivated
                Byron
                Leichtbau

                Comment


                  #9
                  Originally posted by E30SPDFRK View Post
                  Zender plastic bumper valence:
                  Bought this for my black car but found out it doesn't fit under my bumper at my height. Had cracks when I bought it, I've started welding them back together. It's painted Delfin right now but it's very rock chipped. $250 in the shape it's in now, $350 after I fix the cracks, sand it fairly smooth and primer it.
                  interested, pics?

                  Comment


                    #10
                    Best pic I have of it for now.

                    Byron
                    Leichtbau

                    Comment


                      #11
                      Bump, parts added
                      Byron
                      Leichtbau

                      Comment


                        #12
                        bump, bump bump it up
                        Byron
                        Leichtbau

                        Comment


                          #13
                          Some pictures added! And some e34 parts found in the basement.


                          Buy them quick!
                          Byron
                          Leichtbau

                          Comment


                            #14
                            bump
                            Byron
                            Leichtbau

                            Comment


                              #15
                              Y u no want Zender?!
                              Byron
                              Leichtbau

                              Comment

                              Working...
                              X