Announcement

Collapse
No announcement yet.

M20B27, various ETA parts, etc.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M20B27, various ETA parts, etc.

    All parts available for pickup in Moosup, CT.
    I will try to describe these as best I can, I don't want any surprises from either end.

    New Items

    - M20B27+Tranny -
    Please read below if interested.
    ~150-155k or so, true mileage unknown. Odometer died at ~143k sometime after I got the car while it was sitting, estimating I put about 10k or so on it before the car sat. Engine ran really well last time the car was on the road, with the exception of a heavy hesitation that randomly occurred, I could never track it down, when pulling the motor I discovered that a couple of the bolts holding the distributor on were (very)loose. The driveshaft came disconnected whilst driving and ripped half of the selector rod off, don't know if the internals were damaged at all(I would guess they are), or if this is even fixable. Transmission shifted beautifully before this. The valves are noisy, and honestly a good bit louder than the few M20's I have heard, even after 3 valve adjustments, not sure if this is me or something that needs attention.

    New parts including:
    - Timing Belt around 10k miles ago.
    - Thermostat/Housing/a couple of the sensors around 10k miles ago.'
    - Water Pump around 10k miles ago.
    - Cam seal around 10k miles ago.
    - CPS around 10k miles ago.
    - Clutch, slave cylinder around 15k ago. Wasn't done by me, so not sure what else was replaced. Never had a problem with slipping or weird noises.
    - Guibo around 1k ago, not sure if it was damaged, visually looks OK.
    - Spark plugs around 5k miles ago.
    - Valve cover gasket around 5k miles ago.
    - About 3/4 of coolant hoses are new(ranging in mileage from 2k-10k), and included.
    - Mann Oil filter + M1 15w50 around 3k miles ago.
    - Likely something that I'm forgetting.

    Things that need replacing:
    - Motor mounts are original and need to be replaced.
    - The couple hoses I never did replace should be replaced.
    - Tranny mounts were new but got hit when the DS came off, wouldn't use them myself.
    - Possibly more that I'm forgetting.

    Was running Mobil 1 15w50 almost exclusively except for the first oil change. Drips oil from the drain plug, likely needs a new bolt+washer. Don't think it leaks oil from anywhere else, but I could be wrong, maybe a little from the front of the valve cover, but I think that was fixed when I installed the new gasket.

    If you have any questions please PM me. Local PICKUP @ 06354 only. Starting @ $350 OBO, give me an offer. Buy anything else I have for sale and get discounts, of course, I'm very flexible with pricing.

    I'll try to get pictures tomorrow. Unfortunately I don't have any videos of the motor running. I've done loads of transactions with members here, both buying and selling.

    - M20(B27?) Airbox -
    Fully functioning M20 airbox. Not sure if this is ETA specific or not. Includes a pretty clean MANN air filter with >4K miles on it. Pulled for M50 swap.
    $25+SHIP
    NEW PRICE $20+SHIPPING




    End of new items

    All reasonable offers considered, looking mostly for cash but will consider some trades, in particular an IS/MT1 spoiler in good condition with all mounting points intact, or a decent amp for my SVC obcon sub.

    Some prices may be out of line, I didn't have time to do comparisons with other threads.
    Last edited by jclar; 03-12-2013, 12:55 PM.
    '86 325es M50

    #2
    Shift linkage parts pending payment, IS valence will be up shortly.
    '86 325es M50

    Comment


      #3
      I'll take the spoiler bracket. You can keep the rebar, just pack up the plastic pieces. pm me your paypal.
      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      Comment


        #4
        PM sent. spoiler brackets pending payment.
        '86 325es M50

        Comment


          #5
          1. Shift Tower Support PN#25111220707. New is ~$29+shipping. $23 shipped.


          I take that if someone else doesnt take it.

          Comment


            #6
            Both the rebar and the shift linkage parts have been sold, will ship out today.
            '86 325es M50

            Comment


              #7
              BUMP, throw me some reasonable offers, prices are OBO.
              '86 325es M50

              Comment


                #8
                bump, taking offers
                '86 325es M50

                Comment


                  #9
                  New prices, bump.
                  '86 325es M50

                  Comment


                    #10
                    front bumper

                    How much picked up I not that far in hartford

                    Comment


                      #11
                      $35 picked up for the DB bumper itself. $80 for the bumper, turn signal lenses, and like new bumper strips.
                      '86 325es M50

                      Comment


                        #12
                        Bump, reasonable offers will be considered. Need to fund my possible m50 swap so I can get this car back on the road.
                        '86 325es M50

                        Comment


                          #13
                          Bump, throw me offers on anything.
                          '86 325es M50

                          Comment


                            #14
                            Price drop on the IS valance.
                            '86 325es M50

                            Comment


                              #15
                              bump, will take offers on everything.
                              '86 325es M50

                              Comment

                              Working...
                              X