3.23 final drive 1999 Z3M rear LSD diff with my own configuration
40%/40% accel and deccel 3 clutch 2 way action linear/linear setting
my own spare unit. I decided to keep running the 1.5 way kaaz currently in my car instead, at least for this season.
This diff can sleep on the shelf next to its brother e30 188mm 3.15 ratio spare 2 way unit untill next season if nobody is really interested :P
As option to the buyer is full Diff cooler setup with setrab oil cooler (used with warrenty) + mounting+ brand new USA hoses+ AN-10 fittings+ new USA made tilton scavenge diff pump + stock e30 or z3m diff rear plate cover (new and used) both avail. Inquire if serious with your space constraints, will get actual quote per your needs.
76k miles of life. ring and pinion setting is very nice, bearings nice also. you will need to re-use your existing stubs+e30 rear cover.
$565 with e30 rear cover + stubs for pnp install
$760 with Z3m cover included and gaskets and e30 stub axels, ready to install into your e30.
pm if you are serious. local pick up in 94608 ideal
WBS ring gears have a groove cut in them and use BIG BOLTS (m12). non WBS are un-groovy and have M10 hardware.
Center section detail. you will get a complete diff!
40%/40% accel and deccel 3 clutch 2 way action linear/linear setting
my own spare unit. I decided to keep running the 1.5 way kaaz currently in my car instead, at least for this season.
This diff can sleep on the shelf next to its brother e30 188mm 3.15 ratio spare 2 way unit untill next season if nobody is really interested :P
As option to the buyer is full Diff cooler setup with setrab oil cooler (used with warrenty) + mounting+ brand new USA hoses+ AN-10 fittings+ new USA made tilton scavenge diff pump + stock e30 or z3m diff rear plate cover (new and used) both avail. Inquire if serious with your space constraints, will get actual quote per your needs.
76k miles of life. ring and pinion setting is very nice, bearings nice also. you will need to re-use your existing stubs+e30 rear cover.
$565 with e30 rear cover + stubs for pnp install
$760 with Z3m cover included and gaskets and e30 stub axels, ready to install into your e30.
pm if you are serious. local pick up in 94608 ideal
WBS ring gears have a groove cut in them and use BIG BOLTS (m12). non WBS are un-groovy and have M10 hardware.
Center section detail. you will get a complete diff!
Comment