LSD diff, Driveshaft, Trans, and Clutch

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SHunter
    Advanced Member
    • Dec 2010
    • 154

    #1

    LSD diff, Driveshaft, Trans, and Clutch

    All parts are located in West Linn, Or just south of Portland. At this point I am not interested in shipping. Best way to contact me is by phone or txt. Thanks
    5oh3.9one3.7five39

    -Steven

    Sachs clutch and pressure plate out of my car. I don't know how long its been in there but it looks to have most of its life left.
    $100



    E30 325is driveshaft has good guibo and nearly new support bearing.
    $100



    Getrag 260 out of an "87 is" with approximately 260k. Shifts great but does have a bit of the getrag rattle in neutral. Fluid changed about 10k ago and it all looked good.
    $120



    I also have a 3.73s LSD differential with presumably the same mileage as the trans. It limits my slip just fine and doesn't appear to leak at all. It does have a good protective coat of dirt however. Oil was also changed about a 10k ago with no signs of wear. I don't have a good picture but we all know what these look like right?
    $230
  • SHunter
    Advanced Member
    • Dec 2010
    • 154

    #2
    Ba bump

    Comment

    • SHunter
      Advanced Member
      • Dec 2010
      • 154

      #3
      Buuuump

      Comment

      • SHunter
        Advanced Member
        • Dec 2010
        • 154

        #4
        Alright, I have a 3 day weekend. Willing to deliver within a reasonable distance.

        Comment

        • SHunter
          Advanced Member
          • Dec 2010
          • 154

          #5
          bumping

          Comment

          • SHunter
            Advanced Member
            • Dec 2010
            • 154

            #6
            Everything is sold except the clutch and pressure plate. I also still have the single mass flywheel. Make an offer, come and get your parts.

            -Steven

            Comment

            • 1987_325is
              Advanced Member
              • Jun 2010
              • 106

              #7
              If interested in shipping it ill take the flywheel and clutch, name your price.

              Comment

              Working...