Ok, I've got a decent M50 that might be worth finally installing, but I'd want to find a home for my current M20 stroker.
Here's the info:
Block is out of an '88 Super ETA Auto, has about 100k on it, head was sent to machine shop about 10k miles ago, all seals replaced, decked, decarboned, cleaned, etc. Replaced three bent valves while @ shop (old block snapped rod, pistons hit valves.)
Installed new gaskets top to bottom, water pump, t-stat, timing belt, cap/rotor, wireset, plugs, intake/exhaust manifold gaskets, 19# 4-pintle Bosch injectors, brand new FPR. Has a good Sachs clutch, pressure plate and stock flywheel installed.
Reseal was done about 5 years ago, it's starting to leak again, I'd just go through it and regasket it. Car sat through winters, didn't get driven much, so the seals dried out.
I'll include all the accessories - alternator, ps pump, (no ac), oil cooler w/oil filter housing, exhaust manifolds, intake manifold, all hoses, etc. Brand new OEM rubber T-hose that goes from heater core to t-stat housing and out to coolant overflow tank (which I'll include). I have a new set of poly engine and trans mounts, never installed. I'll also include a 173 ECU with a Mark D 93 octane/19# injector chip. I also have a Miller AFM conversion that I can include for additional $$ if the buyer is interested.
Great to clean up and drop in, couple hundred in gaskets and you've got a real nice M20 stroker.
Located in MA, but can deliver within reason. I can bring a hoist with me to deliver it if necessary.
$900 obo. PM/post if interested!
Here's the info:
Block is out of an '88 Super ETA Auto, has about 100k on it, head was sent to machine shop about 10k miles ago, all seals replaced, decked, decarboned, cleaned, etc. Replaced three bent valves while @ shop (old block snapped rod, pistons hit valves.)
Installed new gaskets top to bottom, water pump, t-stat, timing belt, cap/rotor, wireset, plugs, intake/exhaust manifold gaskets, 19# 4-pintle Bosch injectors, brand new FPR. Has a good Sachs clutch, pressure plate and stock flywheel installed.
Reseal was done about 5 years ago, it's starting to leak again, I'd just go through it and regasket it. Car sat through winters, didn't get driven much, so the seals dried out.
I'll include all the accessories - alternator, ps pump, (no ac), oil cooler w/oil filter housing, exhaust manifolds, intake manifold, all hoses, etc. Brand new OEM rubber T-hose that goes from heater core to t-stat housing and out to coolant overflow tank (which I'll include). I have a new set of poly engine and trans mounts, never installed. I'll also include a 173 ECU with a Mark D 93 octane/19# injector chip. I also have a Miller AFM conversion that I can include for additional $$ if the buyer is interested.
Great to clean up and drop in, couple hundred in gaskets and you've got a real nice M20 stroker.
Located in MA, but can deliver within reason. I can bring a hoist with me to deliver it if necessary.
$900 obo. PM/post if interested!
Comment