Rebuilt 885 Head with Schrick Cam, New Rockers, & Dual Valve Springs

[bubbajan21]

Up for sale is a rebuilt 885 head. It is a very nice OEM 885 head (not an AMC) that was recently resurfaced and thoroughly cleaned before being reassembled with a Schrick cam, new rockers, and new dual valve springs. The head has 0 miles on it since the rebuild and it has not been run at all. The model number on the Schrick is a bit difficult to read, but I believe it says 283. So basically, you're buying the cam and getting a free rebuilt 885 head. This cam is $479 from Turner, I'm asking $450 for everything here. I will ship this anywhere in the lower 48 United States at the buyer's expense.

[e30lyf]

good price wont last...

[bpmack16]

Did u ever figure out the size of the larger valves?

[bubbajan21]

good price wont last...

Thanks!

Did u ever figure out the size of the larger valves?

I wasn't able to figure out the size of the valves. They may be larger valves but because I have no documentation or receipts of larger valves, the head is being sold under the assumption that the valves are the stock size.

[IDM]

What about receipts for the new rockers and cam? I'm really interested if you can provide those.

[jink0619]

where in Mass are you? i have a friend that lives near the Celtics stadium and can pickup, pm me for details if you still have it....thanks

[StreetMafia21]

How much shipped to 90710

[20gmr]

What exactly is rebuilt about that. Looks like it was hot tanked reassembled and inspected. Any valve guide measurements? Anyone grind the valves or seats? Ehat valve stem seals where used. I would hope they are new also Not a bad price and not bashing your stuff just figuring out what was done

[hamilton325i]

Very enticing...

Not to crap on your sale... any reason you put head bolts in and left a bit of valve cover gasket on the head? Was this torqued down even though it wasn't run?

[bubbajan21]

What about receipts for the new rockers and cam? I'm really interested if you can provide those.

PM'd

where in Mass are you? i have a friend that lives near the Celtics stadium and can pickup, pm me for details if you still have it....thanks

PM'd

How much shipped to 90710

PM'd

What exactly is rebuilt about that. Looks like it was hot tanked reassembled and inspected. Any valve guide measurements? Anyone grind the valves or seats? Ehat valve stem seals where used. I would hope they are new also Not a bad price and not bashing your stuff just figuring out what was done

When I bought the motor, the word the guy used for the head was "rebuilt" and that's why I've referred to it as such. However, as I didn't do the work myself I can't guarantee it was "rebuilt" and I feel I've priced it with that in mind. Pretty much this is a discounted Schrick cam with a free 885 core thrown in if you'd rather think of it like that.

[bubbajan21]

Very enticing...

Not to crap on your sale... any reason you put head bolts in and left a bit of valve cover gasket on the head? Was this torqued down even though it wasn't run?

The head was fully installed with a new valve cover gasket and head bolts (which were torqued down). I decided it'd be a lot easier to sell and ship the head rather than a motor so I removed it from the block so I could take pictures and so it would be ready to ship.

[bpmack16]

my offer stands

[deansbimmer]

Lots of trolls ITT.

Looks like a 284 cam. SOLID value for $450.

[catuned]

you have pm

[e30 1313]

head

Hey where in mass are you I am in Ct let me know I am interested .