**SUPER SALE**Rebuilt Fuel Injectors & Rebuild Service

[MaksV]

done.

[bastianshaw]

Can you flow test?

[MaksV]

Can you flow test?

At this time I have not built a flow bench. However compressed air is pushed through each injector. I test every single one under pressure. But they are not flow matched, and the price reflects that.

[MaksV]

bump!

[MaksV]

bump

[Grant318is]

Any price difference for 4 injectors?

[MaksV]

Hey guys.

I know currently I am only stocking several sets of 19# injectors at the moment. This is about to change in a big way. I am working hard on getting a large batch of injectors ranging from 19#-30# and higher. I will update this thread as soon as they are available, but to give the interested parties a deadline, I would say check back next week.

Also I have had several people inquire about my cleaning service. I will rebuild your injectors in the same way i rebuild the ones I sell. In the $45 I also include priority shipping back to the owner. I will give you a tracking number as well. Shipping to me is your responsibility and you can do it anyway you like, but I strongly recommend using flat rate boxes or envelopes.

Thanks, and I will have some more injectors on here ready to go soon!

[OnMy2ndE30]

So is it $45 for one injector or $45 for a set of 6? Is that rebuilt or is that sending you cores and you send rebuilt units? I guess I am too confused, lol. Do you have any 17# units?

[MaksV]

So is it $45 for one injector or $45 for a set of 6? Is that rebuilt or is that sending you cores and you send rebuilt units? I guess I am too confused, lol. Do you have any 17# units?

Its $45 for me to rebuild your 6 injectors. This includes shipping back to you. I dont have enough spares to do core exchange, and currently i only have 19# injectors in stock. However I will be getting a large order of injectors soon. So if you need 17's check back in about a week. If you have any more questions, please send me a PM and we can discuss at length.

Thanks,

[bwawuz02]

...24# is for small M20 turbo or built/tuned M42.

[MaksV]

^^^

24# is a small turbo or a nice m50

[bwawuz02]

^^^

Stock M42 Inj = 19# @ 3.0 BAR
Stock M50 Inj = 17# @ 3.5 BAR / 15# @ 3.0 BAR

You do the math. Or just continue to limit your market. A lot of M42 guys also like swapping out their old injectors for the 19# design IIIs.

[MaksV]

^^^

M42 = M50NV - 2 cylinders.
Stock M42 Inj = 19# @ 3.0 BAR
Stock M50 Inj = 17# @ 3.5 BAR / 15# @ 3.0 BAR

You do the math.

I am confused as to what you are trying to prove.... A tune M50 can run 24# injectors with good results. 19# injectors are a good update for a stockish m50. They dont do anything for a M42 as the m42 comes with 19# injectors.

[hiimadrummer]

Can i send you 17lb injectors and get rebuilt 24lb injectors ? If so, how much?

[MaksV]

Can i send you 17lb injectors and get rebuilt 24lb injectors ? If so, how much?

I dont have a set of 24# injectors at the moment. Also I am not really looking for trade in in general.