Originally posted by fatphos
View Post
Announcement
Collapse
No announcement yet.
So-Cal: Megan Racing Euro Series Full Coilovers 45mm and 51mm
Collapse
X
-
Originally posted by e30 gangsta View Posthow much are custom rates?
Comment
-
Originally posted by ohthejosh View PostAny pics on an early model with the higher arches in the rear?
the car sits nice..my oil pan use to sit about 2.5 inches off the ground, now its about 3.5inches since i made the front a tad higher-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
@ fatphos... ever since i purchased those megans man..they work wonders..car takes turn like a champ, amazing product. best part is, you get to adjust the stiffness-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
so this is my car on a set of megans.... poor angle, but its about 2 inches off the ground, starting with my front lip...ill get some other angles in later of the car.-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
what it looks like now:)-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
Originally posted by obes View Post1426_n.jpg[/IMG]
what it looks like now:)
I'm running esm 16x8 et20 esm's with a 5 mm spacer and 225/45's and I can't drop the car much at all without having the front tires touch the spring perch.
Not sure if I'm going to have to run 215/40/16's up front or get shorter springs or both :(Last edited by johnjohnsons54; 08-21-2012, 09:55 AM.
ZF320 | M50 Mani | TRM + 21.5lb Injectors + 3.5in MAF | E36 M3 Rack/Driveshaft | Megan Coilovers | 002R/452's
In the works: UUC Evo 3/DSSR, JB Racing lightweight Flywheel, Shrick cams, BBK (yet to be determined)
I NEED A WINGLESS AW TRUNK LID PLEASE PM ME IF YOU HAVE ONE!
Comment
-
Originally posted by johnjohnsons54 View PostLooks sick! Are you running shorter front springs with that wheel/tire setup? What are the specs?
I'm running esm 16x8 et20 esm's with a 5 mm spacer and 225/45's and I can't drop the car much at all without having the front tires touch the spring perch.
Not sure if I'm going to have to run 215/40/16's up front or get shorter springs or both :(
your probably gnna have to run some thicker spacers just to clear the front..like 15-20mm
im staggered 16x8..16x9...11 offset for all four..rear sits good..front i need 10mm spacers to clear the inner rim from hitting the strut tower/spring.
I'm running 215s in the rear and 205s for the front-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
-
rear baby!-1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
-1987 Coupe (17x10.5"/17x14")
Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*
Follow me on Instagram: obes_sebo
For more updates:)
Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838
Comment
Comment