M50 NV head.
This one was media blasted, machined, etc. Comes with dual valve springs as it should (not installed).
SOLD
30# Red Top injectors. Pretty much brand new!
SOLD
17# Green Top injectors. Pulled from an S50 that ran great. I broke one of the pintles when removing it but these are best to replace when you pull the injectors anyway.
$75
VR stock head gasket - brand new
$40
brand new e34 oil pan gasket
$15
4x100 - 5x114.3 adapters
2" thick, ~6 3/4" diameter. I bought a different set because these didnt fit on the front of my car. Work great on the rear.
$225
Canton 1qt coolant expansion tank
$80
brand new e36 ebrake cables.. check the part number because 95 M3's were different
$20
502 MAF. Can come with the elbow and filter for an extra $10
$100
and last... which is just a feeler
Etoile 455's 4x100 lug pattern
17x9 front, 17x12 rear
et is ~+10 all around. I have to measure but its not stamped because these were built, not bought
They arent perfect and could use some cleaning but I will most likely run them. I am just low on cash and putting it out there.
$1250
one barrel is disassembled and has welds on cracks. I have been talking to VR wheels about a new barrel (~$200)
This one was media blasted, machined, etc. Comes with dual valve springs as it should (not installed).
SOLD
30# Red Top injectors. Pretty much brand new!
SOLD
17# Green Top injectors. Pulled from an S50 that ran great. I broke one of the pintles when removing it but these are best to replace when you pull the injectors anyway.
$75
VR stock head gasket - brand new
$40
brand new e34 oil pan gasket
$15
4x100 - 5x114.3 adapters
2" thick, ~6 3/4" diameter. I bought a different set because these didnt fit on the front of my car. Work great on the rear.
$225
Canton 1qt coolant expansion tank
$80
brand new e36 ebrake cables.. check the part number because 95 M3's were different
$20
502 MAF. Can come with the elbow and filter for an extra $10
$100
and last... which is just a feeler
Etoile 455's 4x100 lug pattern
17x9 front, 17x12 rear
et is ~+10 all around. I have to measure but its not stamped because these were built, not bought
They arent perfect and could use some cleaning but I will most likely run them. I am just low on cash and putting it out there.
$1250
one barrel is disassembled and has welds on cracks. I have been talking to VR wheels about a new barrel (~$200)
Comment