M6X V8 Mounts for E30 / Also 6 sets of blank MMP Turbo Adapters

[MonkeyMadness]

M6X Swap Mounts

BUY MY MOUNTS :hitler:

$80 + shipping


I also Have 6 blank sets of MMP turbo manifold adaptors

$80 + shipping!


Once there gone there gone~!

[MonkeyMadness]

Bump!

[Mr. Burns]

wow where were these a couple years ago when I ordered mine from e30.de Germania, pushing $300.

good deal here kids!

[MonkeyMadness]

TTT :up:

[328ijunkie]

Are these used with subframe spacers? Any mounted pictures?

[noid]

Also interested to know if these mounts are based on the idea of using subframe spacers.

[MonkeyMadness]

Hello,
Yes there Pos. 2 and 3
As all projects there will be some fab work needed..
They can be used with or without sub-frame spacers!
These with e34 mount will bolt directly to the sub-frame and clear the pan..

[noid]

I should rephrase: do these mounts allow for the engine to sit in such a way that drivetrain angle is eliminated or does it require subframe spacers to mitigate the angle?

If these are a direct copies of the 300mm.de then these require subframe spacers.

The point is not to clear the oil pan, the point is to have a straight drive train.

http://www.rtsauto.com/mounting-an-m60-m62-without-subframe-spacers-and-without-drivetrain-angle/

[MonkeyMadness]

Ohhh ok sorry for not catching what you meant... ;)

I should rephrase: do these mounts allow for the engine to sit in such a way that drivetrain angle is eliminated

No

does it require subframe spacers to mitigate the angle?

Yes

There will be more on this in my V8 build thread...

[328ijunkie]

Lame :(

[MonkeyMadness]

Lame :(

Are you looking to do not use frame spacers with your build?

[328ijunkie]

Nope. Dont like Fng with suspension geometry. Will be making custom mounts i suppose and modding the oil pan. :(

[nrubenstein]

Are you looking to do not use frame spacers with your build?

Subframe spacers are a shit solution. It has the handling impact of lowering the front end nearly an inch. Given that most of these cars start out low, they really can't afford the loss. 20mm once you're in the bad part of the curve is huge.

[M-technik-3]

Should put these in retail.

[irrelevante30]

are these still available?