All prices are OBO and do NOT include shipping… package deals can be made and im open to trade for some decent wheels.
Located in Coatesville, PA
Canton expansion tank
$80
502 Maf
$75
TRE 803 MAF
$100
17# green top injectors
One pintle cap is chipped
$50
S5x / M5x VR Head Gasket
$40
E34 oil pan gasket
$20
E36 Aasco lightened flywheel
$300
Two E36 Sachs clutches. Both in good shape with pressure plates.
$130 each
#1
#2
4x100 to 5x114.3 wheel adapters
They are 2” thick and come with all of the hardware.. originally cost me $300 + shipping and a 2 month wait.
$200
E36 Alpine sunroof
$100
Streetbike tire warmers. Non-adjustable and never used.
$125
600rr real Carbon Fiber case cover
03-06
$75
T28 ISIS outlet Pipe
$80
SR20 Freddy intake mani. One tab is cracked
$60
SR20 Oil Filter relocation kit… comes with A/N lines and fittings. Will need an oil pressure sender unit or filler plug for one port. I think this is a circuit sports setup
$120
S14 T28. The impeller is chewed up but there isn’t much shaft play.
Will come with the outlet pipe, A/N lines, HKS WG, Inlet, etc.
$250
Sr20 trans. Comes with all shown sensors.
I never had a chance to use this but the PO said it was in good shape and had no issues.
$300
SR20 HKS 3 Puck Clutch. I never saw one of these before so don’t have much info on it… The ceramic looks good and I can get close ups if needed. It comes with the flywheel and PP.
$400
Greddy SR20 Z32 maf intake pipe thing… capped off
$80
$20
Coolant pipe with cap extension tigged
$40
SR20 water pump pulley
$40
Z32 MAF ($100)
Intake Manis.. from left to right, RB25, S13, S14.
Each ITM comes with the sensors, lines, throttle bodies, etc in the pictures. If it is not in the pic let me know and I may be able to find it.
FMIC – about 3.5” thick and end tanks face back
$100
350z LSD. Pulled from an 04.5 enthusiast with 60k
$250
NRG 350z slim hub
$90
2001 Xr50
ASV lever, renthal fat bars, fast 50s pegs, BBR springs, BBR seat, sikk 50’s graphics, etc etc
$500
Located in Coatesville, PA
Canton expansion tank
$80
502 Maf
$75
TRE 803 MAF
$100
17# green top injectors
One pintle cap is chipped
$50
S5x / M5x VR Head Gasket
$40
E34 oil pan gasket
$20
E36 Aasco lightened flywheel
$300
Two E36 Sachs clutches. Both in good shape with pressure plates.
$130 each
#1
#2
4x100 to 5x114.3 wheel adapters
They are 2” thick and come with all of the hardware.. originally cost me $300 + shipping and a 2 month wait.
$200
E36 Alpine sunroof
$100
Streetbike tire warmers. Non-adjustable and never used.
$125
600rr real Carbon Fiber case cover
03-06
$75
T28 ISIS outlet Pipe
$80
SR20 Freddy intake mani. One tab is cracked
$60
SR20 Oil Filter relocation kit… comes with A/N lines and fittings. Will need an oil pressure sender unit or filler plug for one port. I think this is a circuit sports setup
$120
S14 T28. The impeller is chewed up but there isn’t much shaft play.
Will come with the outlet pipe, A/N lines, HKS WG, Inlet, etc.
$250
Sr20 trans. Comes with all shown sensors.
I never had a chance to use this but the PO said it was in good shape and had no issues.
$300
SR20 HKS 3 Puck Clutch. I never saw one of these before so don’t have much info on it… The ceramic looks good and I can get close ups if needed. It comes with the flywheel and PP.
$400
Greddy SR20 Z32 maf intake pipe thing… capped off
$80
$20
Coolant pipe with cap extension tigged
$40
SR20 water pump pulley
$40
Z32 MAF ($100)
Intake Manis.. from left to right, RB25, S13, S14.
Each ITM comes with the sensors, lines, throttle bodies, etc in the pictures. If it is not in the pic let me know and I may be able to find it.
FMIC – about 3.5” thick and end tanks face back
$100
350z LSD. Pulled from an 04.5 enthusiast with 60k
$250
NRG 350z slim hub
$90
2001 Xr50
ASV lever, renthal fat bars, fast 50s pegs, BBR springs, BBR seat, sikk 50’s graphics, etc etc
$500
Comment