Announcement

Collapse
No announcement yet.

FS: IE Stainless exhaust & catless midpipe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS: IE Stainless exhaust & catless midpipe

    SOLD!



    Both used. I bought them and converted my eta to a 325i dual pipe exhaust. I'm putting in an S50, so I can no longer use these.

    The catless midpipe I bought used, it is older but does not leak.
    $70 + shipping

    IE stainless catback. Used for MAYBE 5-7k miles. Just long enough to break it in. Never seen snow or salt. Very nice tone, not too loud, but definitely louder when you get on it...especially with the complete exhaust setup.
    $250 + shipping

    I also have some muffler mounting brackets that have only been on the car as long as the exhaust...for sale cheap, but only with sale of one of the exhaust sections.



    As you can see in this picture, there are a couple of small dull spots on the tips. VERY faint. It was rubbing my Zender rear apron and I used a soft dremel bit to get the melted plastic off. It will definitely come out with some rubbing compound or something. I just don't have the time or patience. But like I said, it's barely noticeable. I just want to be honest with the buyer so they know exactly what they are getting and there are not surprises.
    Last edited by Beej '86 325es; 01-24-2006, 05:42 AM.
    -Brandon
    '86 325es S50
    '12 VW GTI Autobahn DSG
    '03 540i M-Sport (sold)
    '08 Jeep SRT-8 (sold)

    For sale:
    S50 TMS chip for Schricks

    #2
    I wish my exhaust were bad enough to justify buying this, but . . .

    alas, all i have is a loose heatshield.
    Current Cars
    2014 M235i
    2009 R56 Cooper S
    1998 M3
    1997 M3

    Comment


      #3
      I should add, if you're within a reasonable distance, I'll meet you part way so I don't have to deal with shipping this.
      -Brandon
      '86 325es S50
      '12 VW GTI Autobahn DSG
      '03 540i M-Sport (sold)
      '08 Jeep SRT-8 (sold)

      For sale:
      S50 TMS chip for Schricks

      Comment


        #4
        how does it sound w/o the cat?


        i already have the IE exhaust, but may want to update the midpipe

        Comment


          #5
          Originally posted by robert325is
          how does it sound w/o the cat?


          i already have the IE exhaust, but may want to update the midpipe
          R.I.P 07/01/09 - 04/23/10 :(

          Comment


            #6
            shipping to 49525 for both pieces. Thanks man.

            -Ali

            Comment


              #7
              It's hard to say how it sounds without the cat. For one, you guys both have an "i", where I had this installed on my eta. Plus I installed it all at once. I'd imagine it's just slightly louder though, this is basically a straight through exhaust setup. I think I have an mp3 of the exhaust at home, when it was partially broken in. I'll post it up when I get home from work this afternoon.
              -Brandon
              '86 325es S50
              '12 VW GTI Autobahn DSG
              '03 540i M-Sport (sold)
              '08 Jeep SRT-8 (sold)

              For sale:
              S50 TMS chip for Schricks

              Comment


                #8
                so do you know how much the shipping is going to be?

                -Ali

                Comment


                  #9
                  Originally posted by Ali//325i
                  so do you know how much the shipping is going to be?

                  -Ali
                  Sorry, I didn't see your post earlier. I'll get back with you on that. After looking into it a little, I think it will be a lot cheaper to ship them both separately.
                  -Brandon
                  '86 325es S50
                  '12 VW GTI Autobahn DSG
                  '03 540i M-Sport (sold)
                  '08 Jeep SRT-8 (sold)

                  For sale:
                  S50 TMS chip for Schricks

                  Comment


                    #10
                    shipping to 60087?
                    Continuous For Sale Thread
                    323i s50

                    Comment


                      #11
                      shipping on midpipe to 77059 too.

                      Comment


                        #12
                        whats your paypal I want that exhaust and shipping to Portland Oregon 97229 consider it sold
                        Sold-87 325
                        BBS RK Wheels
                        H&R Cup Kit
                        E30 ///M3 Light up knob
                        Clutch Stop
                        ///M Roadster FloorMats
                        Jim C Chip

                        91 318is
                        M50 Swap
                        Headers
                        UUC Underdrive pulleys
                        K&N 3in Cone
                        Jim C Chip
                        Soon H&R Coilovers
                        BBS RS

                        Comment


                          #13
                          Sorry for the delay on shipping quotes, guys. Work has been nuts lately and it's been hard to make time package these items. These are akward to package well. I should be able to get shipping quotes to you all tomorrow night. But be aware there are a few of you in line here.

                          Thanks for your patience, guys.

                          -Brandon
                          -Brandon
                          '86 325es S50
                          '12 VW GTI Autobahn DSG
                          '03 540i M-Sport (sold)
                          '08 Jeep SRT-8 (sold)

                          For sale:
                          S50 TMS chip for Schricks

                          Comment


                            #14
                            How would you go about making a catless midpipe? Does anyone sell them?

                            Comment


                              #15
                              Originally posted by e30 gangsta
                              How would you go about making a catless midpipe? Does anyone sell them?
                              take off pipes, measure pipes, bend up some new pipes, minus the cat, install.

                              Comment

                              Working...
                              X