800whp Turbo E30 Partout

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rneedham1979
    E30 Modder
    • Jul 2008
    • 852

    #1

    800whp Turbo E30 Partout

    Gents, As some of you know, I'm parting my E30. I have a garage full of parts; like seriously so this thread will be updated with new parts often and as I dig through boxes. For now, here are some of the larger items for sale. Prices are firm.

    Engine- 87mm S52, Eagle rods and CP pistons. Block has been bored to 87mm, o-ringed and threads cut for 11mm studs. Bottom end has less than 3k miles. The head is brand new with zero miles on the rebuild. Head has a receiver groove for the o-ring, full Supertech valve-train with 1mm larger intake valves. Erling headgasket and 11mm ARP2000 head studs wrap up the engine. I'm asking 5k, I have WAY more into it. Price out a few of the items and you'll see you cannot come close to replicating this engine for anywhere close to 5k. Also, I'm willing to travel/ deliver to help accommodate a sale.

    Cams- I have one schrick exhaust cam and one S50 intake cam. Prob not the most ideal set up but made decent power. FYI- Better than a S50/2 exhaust cam... 600 shipped.

    Fuel pump harness- I have a fuel safe fuel pump harness for sale. This allows you to run two walbro pumps through one bulkhead fitting. Also have the female portion of the harness. over 150 for both, asking 115 shipped. Brand new, never used! Great for dual pump set ups!

    Vanos- Dr. Vanos Stage II. Less than 20k miles, absolutely no issues! $350 shipped, no core needed.

    Valvecover- S52 valvecover and OBDII Coils $175 shipped

    Cam timing chain tensioner (new)- $115 shipped

    Vanos solenoid (new)- $100 shipped

    Jegs E85 Metal fuel filter (new)- -10 in/out $40 shipped

    ZF 5 speed- Has all new detents. Shifts great although the shifter still seems a bit "loose" but again, works great. SOLD

    Line loc- Hurst line loc (roll control) #174-5000. Brand new in box. 80 shipped.

    Clutch- Clutchnet red, 3 puc. Needs a rebuild. $200 shipped

    Clutch- Clutchnet red 6 puc. Need a rebuild. $200 shipped

    Mishimoto Radiator- No leaks, has a few bent fins and should probably be flushed before use. Comes with E30 shroud. $175 shipped

    Head Studs- Used ARP2000 head studs. $150 shipped







    I have a metric ass load of stuff in the garage. I will be adding more stuff over the next week or so. Thanks for looking! Email me @ rneedham1979 at yahoo dot com
    Last edited by rneedham1979; 11-25-2013, 05:33 PM.
    Turbo E30
    Roadkill 80lb 93 octane OBDI tune
    BavSol Cylinder Head
    Stock S50 in. cam Schrick ex. cam
    Otis' tubular T4 manifold
    Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
    GT4094r w/Batmowheel Impeller
    614whp@17.5psi, 100 Oct
    690whp@21psi, 100 Oct
    801whp@27psi, 110 URT
    Old: 1/4 mile: 10.91@144.38 (636whp)
    New: ?
    http://www.youtube.com/watch?v=L_f7fUVqblI
  • Jalves619
    E30 Addict
    • Mar 2010
    • 596

    #2
    Holy mother of god.

    Comment

    • rneedham1979
      E30 Modder
      • Jul 2008
      • 852

      #3
      Originally posted by Jalves619
      Holy mother of god.
      LOL- there's quite a bit more. Just gotta dig through my stuff and post...
      Turbo E30
      Roadkill 80lb 93 octane OBDI tune
      BavSol Cylinder Head
      Stock S50 in. cam Schrick ex. cam
      Otis' tubular T4 manifold
      Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
      GT4094r w/Batmowheel Impeller
      614whp@17.5psi, 100 Oct
      690whp@21psi, 100 Oct
      801whp@27psi, 110 URT
      Old: 1/4 mile: 10.91@144.38 (636whp)
      New: ?
      http://www.youtube.com/watch?v=L_f7fUVqblI

      Comment

      • Poorboyz
        R3VLimited
        • May 2012
        • 2117

        #4
        Why the partout?
        sigpic
        Rebuilding since 07/06/2016

        Poorboyz Parts For Sale - Updated 01/20/17 - Will be updated soon - Have many parts to post

        Poorboyz Feedback Thread

        Comment

        • rneedham1979
          E30 Modder
          • Jul 2008
          • 852

          #5
          Originally posted by Poorboyz
          Why the partout?
          I'm spending time with my kids. We bought quads and we're having fun together, as a family.

          This thread explains everything.

          Bimmerforums is the preferred online BMW Forum and community for BMW owners. At Bimmerforums, you will find technical how-to information maintenance specifics audio advice wheel and tire combinations and model specific details not found anywhere else. Our professionals are here to help make sure you find the answers you need to your questions and our community is here to help other brainstorm ideas for the future.
          Turbo E30
          Roadkill 80lb 93 octane OBDI tune
          BavSol Cylinder Head
          Stock S50 in. cam Schrick ex. cam
          Otis' tubular T4 manifold
          Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
          GT4094r w/Batmowheel Impeller
          614whp@17.5psi, 100 Oct
          690whp@21psi, 100 Oct
          801whp@27psi, 110 URT
          Old: 1/4 mile: 10.91@144.38 (636whp)
          New: ?
          http://www.youtube.com/watch?v=L_f7fUVqblI

          Comment

          • fresh_TD
            R3VLimited
            • Aug 2013
            • 2457

            #6
            One word, ridiculous :-)

            Sent from my GS4 Active
            '91 318i (Alpine) - daily
            '88 325ix (Zinno) - drive here and there!

            Comment

            • ColdAsLife
              Advanced Member
              • Mar 2013
              • 142

              #7
              Will the drive shaft bolt up to a Getrag 260?

              Comment

              • obes
                E30 Enthusiast
                • Apr 2012
                • 1156

                #8
                wow...amazing..
                that motor...
                -1986 S50Turbo Sedan (475WHP/417WTQ) Castromotorsport Built (Sold)
                -1987 Coupe (17x10.5"/17x14")
                Castromotorsport / Buddha_Concept_designs Built *UnderConstruction*



                Follow me on Instagram: obes_sebo
                For more updates:)
                Purchase FeedBack http://www.r3vlimited.com/board/showthread.php?t=278838

                Comment

                • e30style
                  Advanced Member
                  • Sep 2012
                  • 194

                  #9
                  Ill take the side skirts. Pm sent.

                  Comment

                  • ser1992
                    E30 Addict
                    • Feb 2013
                    • 482

                    #10
                    ill take the skirts if he flakes.

                    Comment

                    • erik2810
                      Noobie
                      • Sep 2013
                      • 7

                      #11
                      I'll buy the skirts if both guys above flake ;)

                      Comment

                      • essi1553
                        E30 Addict
                        • Apr 2012
                        • 440

                        #12
                        Meh, Can't afford your stuff. Well more like I can't convince myself to have an 800hp e30 even if I could, but you sound like a good father, and that picture of your 5 year old sitting on the quad in the lake made me choke on my drink.

                        Free Bump for a good family man.

                        Comment

                        • rneedham1979
                          E30 Modder
                          • Jul 2008
                          • 852

                          #13
                          Originally posted by ColdAsLife
                          Will the drive shaft bolt up to a Getrag 260?
                          Not sure
                          Turbo E30
                          Roadkill 80lb 93 octane OBDI tune
                          BavSol Cylinder Head
                          Stock S50 in. cam Schrick ex. cam
                          Otis' tubular T4 manifold
                          Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
                          GT4094r w/Batmowheel Impeller
                          614whp@17.5psi, 100 Oct
                          690whp@21psi, 100 Oct
                          801whp@27psi, 110 URT
                          Old: 1/4 mile: 10.91@144.38 (636whp)
                          New: ?
                          http://www.youtube.com/watch?v=L_f7fUVqblI

                          Comment

                          • rneedham1979
                            E30 Modder
                            • Jul 2008
                            • 852

                            #14
                            Originally posted by e30style
                            Ill take the side skirts. Pm sent.
                            Responded
                            Turbo E30
                            Roadkill 80lb 93 octane OBDI tune
                            BavSol Cylinder Head
                            Stock S50 in. cam Schrick ex. cam
                            Otis' tubular T4 manifold
                            Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
                            GT4094r w/Batmowheel Impeller
                            614whp@17.5psi, 100 Oct
                            690whp@21psi, 100 Oct
                            801whp@27psi, 110 URT
                            Old: 1/4 mile: 10.91@144.38 (636whp)
                            New: ?
                            http://www.youtube.com/watch?v=L_f7fUVqblI

                            Comment

                            • rneedham1979
                              E30 Modder
                              • Jul 2008
                              • 852

                              #15
                              Originally posted by essi1553
                              Meh, Can't afford your stuff. Well more like I can't convince myself to have an 800hp e30 even if I could, but you sound like a good father, and that picture of your 5 year old sitting on the quad in the lake made me choke on my drink.

                              Free Bump for a good family man.
                              Thanks, man!
                              Turbo E30
                              Roadkill 80lb 93 octane OBDI tune
                              BavSol Cylinder Head
                              Stock S50 in. cam Schrick ex. cam
                              Otis' tubular T4 manifold
                              Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
                              GT4094r w/Batmowheel Impeller
                              614whp@17.5psi, 100 Oct
                              690whp@21psi, 100 Oct
                              801whp@27psi, 110 URT
                              Old: 1/4 mile: 10.91@144.38 (636whp)
                              New: ?
                              http://www.youtube.com/watch?v=L_f7fUVqblI

                              Comment

                              Working...