IE 310mm BBK (front) used

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • manuel325i
    Member
    • Jun 2004
    • 80

    #1

    IE 310mm BBK (front) used

    SOLD

    I have for sale a used Ireland Engineering 310mm front BBK (non M). These are fixed calipers. I am selling the kit because I have decided to go another route with my car.

    The good:
    -The kit has about 5K miles on it.
    -The brake pads have plenty of life left on them.
    -6 piston WilWood brake calipers
    -Complete kit ready to bolt on.
    -2 piece blank rotor
    -Stainless steel brake lines included

    The bad:
    -Rotors have plenty of life but due to 2 bad front wheel bearings, the rotors rubbed against my tie rod during tight turns causing a slight groove on the back side of the rotor. Even with the slight groove the brakes ran fine and I do not think you necessarily need new rotors. The car still stopped on a dime when I needed it to.
    -The tires rubbed against the plastic covering on the Stainless steel brake lines when I first installed the lines so a little bit of the plastic was rubbed off. This is only cosmetic and did not affect the performance of the brakes. The stainless steel line was still fully functional and in tact. I had NO leaks with these lines.

    I am asking $750 shipped (keep in mind this kit sells for $1175 brand new). PM me for more details or if you would like more pictures.









    Last edited by manuel325i; 08-15-2014, 04:13 PM.
  • manuel325i
    Member
    • Jun 2004
    • 80

    #2
    Bump!

    Comment

    • manuel325i
      Member
      • Jun 2004
      • 80

      #3
      bump

      Comment

      • manuel325i
        Member
        • Jun 2004
        • 80

        #4
        bump

        Comment

        • Martin C.
          E30 Enthusiast
          • Sep 2008
          • 1043

          #5
          ...interested in any trades?
          1997 328i - SOLD
          1991 325is - SOLD
          2002 325i - SOLD :(


          Currently:
          1991 318is
          2011 328i xDrive
          2017 Highlander - Toy Hauler

          sigpic

          Comment

          • manuel325i
            Member
            • Jun 2004
            • 80

            #6
            Depends on what you are trading?

            Comment

            • Martin C.
              E30 Enthusiast
              • Sep 2008
              • 1043

              #7
              PM sent...
              1997 328i - SOLD
              1991 325is - SOLD
              2002 325i - SOLD :(


              Currently:
              1991 318is
              2011 328i xDrive
              2017 Highlander - Toy Hauler

              sigpic

              Comment

              • chuck90m3
                E30 Addict
                • Dec 2003
                • 568

                #8
                Theses sold yet? If not will they fit behind a set of e39 style 5 re drilled to 4x100 with a 20mm offset?
                Last edited by chuck90m3; 08-05-2014, 05:36 AM.
                "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

                Friedrich Nietzsche

                Comment

                • eduTechnic
                  E30 Addict
                  • Dec 2012
                  • 400

                  #9
                  Originally posted by chuck90m3
                  Theses sold yet? If not will they fit behind a set of e39 style 5 red rilled to 4x100 with a 20mm offset?
                  Go print out their fitment guide and hold it up to your wheel to check fitment. Glws OP!
                  Turbo M50 4 Door Build thread here 4 Sale thread

                  Comment

                  • MJCRO
                    E30 Addict
                    • Apr 2012
                    • 597

                    #10
                    Damn... I really want these.

                    Comment

                    • manuel325i
                      Member
                      • Jun 2004
                      • 80

                      #11
                      They are still for sale. I am running 17x7 in front with a 25mm offset with no spacers. These calipers require a 16" rim or higher. I believe it should clear with the style 5's but I am not totally certain. According to their site, "you need only 1.75" from the rotor to the back side of the spokes to clear this caliper."

                      Comment

                      • Crazyhorse13
                        Member
                        • Dec 2013
                        • 63

                        #12
                        Wish I could glws

                        Comment

                        • manuel325i
                          Member
                          • Jun 2004
                          • 80

                          #13
                          bump

                          Comment

                          • Wschnitz
                            R3V OG
                            • Dec 2011
                            • 8089

                            #14
                            I want but no monies has
                            1989 BMW 325is | 2019 Ford Ranger FX4
                            willschnitz

                            Comment

                            • manuel325i
                              Member
                              • Jun 2004
                              • 80

                              #15
                              Shoot me an offer, who knows I might like the price :)

                              Comment

                              Working...