i have a freshly rebuilt 2.7I Seta bottom end and a 2.5liter top end.
the swap is currently in my car, its running a professionally ported top end with new rocker arms and a stock cam, every seal has been replaced with quality parts
Goetze head gasket
conti belt kit
ske t-belt roller
paper oil pan gasket sealed with kuril T sealant
all bmw seals including rear main seal and front cover seals,
the motor has 5000 miles on it and it makes about 170 whp estimation at the very minimum. it pulls really well
the bottom end came out of a 1988 seta 528e
and the motor comes with a spare head that hasn't been touched just incase.
this add is for complete motor, new alternator lifetime warranty ,
fan and fan clutch , fan shroud, all hoses and everything you need to complete the job and even can come with the exhaust
has a chip to run 91 octane and to rev to 6950

IMG]http://i65.photobucket.com/albums/h210/adamslayerxyz/e30%20wheels/1272C68A-55D3-494A-9C09-70118E430C35_zpsfurtdkmh.jpg[/IMG]


.

Re sealed

Lapped the valves in at the machine shop, and machined the head.
the hard part was done
the price for this swap is
2200$ installed
1500$ oBo for just the engine and wiring harness thats in good condition

[URL=http://s65.photobucket.com/user/adamslayerxyz/media/e30%20wheels/5D3F6D01-A797-4326-89EF-AA96F5734D4E_zpszgpft5dg.jpg.html]
the swap is currently in my car, its running a professionally ported top end with new rocker arms and a stock cam, every seal has been replaced with quality parts
Goetze head gasket
conti belt kit
ske t-belt roller
paper oil pan gasket sealed with kuril T sealant
all bmw seals including rear main seal and front cover seals,
the motor has 5000 miles on it and it makes about 170 whp estimation at the very minimum. it pulls really well
the bottom end came out of a 1988 seta 528e
and the motor comes with a spare head that hasn't been touched just incase.
this add is for complete motor, new alternator lifetime warranty ,
fan and fan clutch , fan shroud, all hoses and everything you need to complete the job and even can come with the exhaust
has a chip to run 91 octane and to rev to 6950

IMG]http://i65.photobucket.com/albums/h210/adamslayerxyz/e30%20wheels/1272C68A-55D3-494A-9C09-70118E430C35_zpsfurtdkmh.jpg[/IMG]


.

Re sealed

Lapped the valves in at the machine shop, and machined the head.
the hard part was done
the price for this swap is
2200$ installed
1500$ oBo for just the engine and wiring harness thats in good condition

[URL=http://s65.photobucket.com/user/adamslayerxyz/media/e30%20wheels/5D3F6D01-A797-4326-89EF-AA96F5734D4E_zpszgpft5dg.jpg.html]

Comment