Patch Panel, Rust Repair

[brent5631]

I'm about ready to cut up the car im parting out. I wanted to see if anyone wanted any patch panels from a rust free Texas car. I have already sold the drivers floor pan and passenger rear corner.

Just to give an idea on price a floorpan is about $150 shipped.

Also the car is a slick top if any one is interested in the roof panel.

[ck_taft325is]

Valance? ;)

[brent5631]

Valance? ;)

Sorry, spoken for.

[Steve Corbett]

Drivers door forward jam. The door brake assist or hold open piece. Mine seems to be disconnected on the forward weld? Snaps every time I open/close the door. Not sure what is broke.

[ThatOneEuroE30]

Damn it if this would have come up when I did my rust repair. And if this was a 2 door if take the rockers

[brent5631]

Bump. Looking to get everything cut off this weekend. It also has a perfect radiator support and front frame rails.

[Gooneric]

scuttle panel any good?

[brent5631]

Bump

[Waterguy]

If willing, I will take both entire rocker panels and passenger frame rail. Pm sent

[325Eblue]

I need drivers side rear corner panel needed to fix the infamous trunk rust from inside and down near exterior high pressure fuel pump thanks

[iceman44]

I could use the rear apron but half of it is gone damn

[325Eblue]

here is the victim of a walmart parking lot the wheel well was bashed in exposing my rust problem right rear corner panel , not sure where the easiest place is to cut and seam for a body guy to work with. I think they take it to the roof line just passed the pop out windows? IDNk maybe somebody here has some knowledge on a drivers side rear corner / quater panel thanks Scott :p

oh my new signature is as follows

Did U C Kim K's naked front and rear? Paper magazine did!!!

[brent5631]

here is the victim of a walmart parking lot the wheel well was bashed in exposing my rust problem right rear corner panel , not sure where the easiest place is to cut and seam for a body guy to work with. I think they take it to the roof line just passed the pop out windows? IDNk maybe somebody here has some knowledge on a drivers side rear corner / quater panel thanks Scott :p

It looks like you have a early model which has different rear quarters.

[DEADZONER1]

Ahhhhhhhh....you cut the rear apron/valence.....I need one to convert my early model

[325Eblue]

It looks like you have a early model which has different rear quarters.

thats is a 2 door 1986 ES ,no go ?