I have some odds and ends I will be adding to this FS thread.
Ebay chip for an #173 ECU $20 shipped. -SOLD!
#021 Eta ecu with another ebay chip pre installed $25 shipped. This was one of the ecu's I used after swaping the eta into my 318i. It worked flawlessly and I was very impressed with the chip, especially after I put the big six AFM on the car and 3.0 bar FPR.
#153 ECU (motronic 1.1) $15 shipped. I used this ecu to get by untill I could get a 173 ecu. It was a remaned ecu from Programma. Worked fine for me with no idle issues. (I did open it just to see what the newer ecu's looked like.) I tested it again after opening it up and it worked fine.
Motronic 1.0 Idle control valve for early eta's $10 shipped. Worked perfectly fine before I did my motronic 1.3 swap. I painted it wrinkle black which didn't really come out good but I taped all the ends off before I painted it so you don't have to worry about paint inside the unit.
Green box idle control module $10 shipped. This was the same one used with the ICV, again no problems at all worked fine.
Cold start injector $10 shipped. Worked fine in summer and winter the car never let me down and always started pretty quickly.
Big six AFM. -SOLD!
325i Throttle position switch $10 Shipped. Should work on any m20 that uses this type of a switch. Came off of an 87 325i, works perfectly.
M20B25 stock cam shaft $40 Shipped. I was going to use this as a core for a regrind but instead managed to get a better stock cam. All bearing surfaces look really good. The lobes have minor pitting. Could still be used as is or as a good core.
E30 Tie rod brand new in package OCAP brand $25 Shipped.
I bought this because I thought I had one going out but it was a wheel bearing instead. I put one of the same brand on my car a little over a year ago with no problems from it what so ever.
Glyco 0.50MM over m20/m50 main bearings brand new $40 Shipped.
Brand new in the package, these are second oversized. part# 11211706866
Kolbenschmidt 0.25MM over m20/m50 Main Bearings Brand new $40 Shipped.
Brand new in the package, These are first oversized. Part# 87491611
I will add more stuff when I have time. Feel free to pm me. I usually will ship items USPS priority. I prefer paypal or postal money orders. I will only ship to the US. paypal is srfreem@alltel.net
For feedback you can check ebay. My account is mcgrath_01
Ebay chip for an #173 ECU $20 shipped. -SOLD!
#021 Eta ecu with another ebay chip pre installed $25 shipped. This was one of the ecu's I used after swaping the eta into my 318i. It worked flawlessly and I was very impressed with the chip, especially after I put the big six AFM on the car and 3.0 bar FPR.
#153 ECU (motronic 1.1) $15 shipped. I used this ecu to get by untill I could get a 173 ecu. It was a remaned ecu from Programma. Worked fine for me with no idle issues. (I did open it just to see what the newer ecu's looked like.) I tested it again after opening it up and it worked fine.
Motronic 1.0 Idle control valve for early eta's $10 shipped. Worked perfectly fine before I did my motronic 1.3 swap. I painted it wrinkle black which didn't really come out good but I taped all the ends off before I painted it so you don't have to worry about paint inside the unit.
Green box idle control module $10 shipped. This was the same one used with the ICV, again no problems at all worked fine.
Cold start injector $10 shipped. Worked fine in summer and winter the car never let me down and always started pretty quickly.
Big six AFM. -SOLD!
325i Throttle position switch $10 Shipped. Should work on any m20 that uses this type of a switch. Came off of an 87 325i, works perfectly.
M20B25 stock cam shaft $40 Shipped. I was going to use this as a core for a regrind but instead managed to get a better stock cam. All bearing surfaces look really good. The lobes have minor pitting. Could still be used as is or as a good core.
E30 Tie rod brand new in package OCAP brand $25 Shipped.
I bought this because I thought I had one going out but it was a wheel bearing instead. I put one of the same brand on my car a little over a year ago with no problems from it what so ever.
Glyco 0.50MM over m20/m50 main bearings brand new $40 Shipped.
Brand new in the package, these are second oversized. part# 11211706866
Kolbenschmidt 0.25MM over m20/m50 Main Bearings Brand new $40 Shipped.
Brand new in the package, These are first oversized. Part# 87491611
I will add more stuff when I have time. Feel free to pm me. I usually will ship items USPS priority. I prefer paypal or postal money orders. I will only ship to the US. paypal is srfreem@alltel.net
For feedback you can check ebay. My account is mcgrath_01
Comment