E30 Ground control camber plates/coilovers/koni shocks

[laxplayermjd]

updated items in a new thread with other parts

[CaliDazze]

Im interested in the camber plates if you are going to part out.

[laxplayermjd]

Im interested in the camber plates if you are going to part out.

Ill keep it in mind. Wish i had the stock suspension to put on so i could part out. Shoot me a pm with an offer if you would like.

[laxplayermjd]

Does anyone near memphis tn want to donate to me a stock suspension setup that i can use in the mean time? Then ill let this go cheaper

[laxplayermjd]

Well i have had quite a few messages about parting this out. Camber plates and coils seem to be the most wanted item.I Think for the coilovers i have to include the strut housings still because the lower spring perch is welded to the strut housing.

Message me with offers and ill continue to consider parting this setup out.
Thanks guys

[zcenterb]

I have a full Bilstein B12 kit on my car if you'd consider a tradesies? Not sure if the Eibach Races are spec legal though. Bavauto has all the part numbers you need to cross check if you need to. Curious whether the strut housing are the ground control ones that are reinforced or if they are just stock housings with threaded perches and link tabs welded on. Also curious about rust... any chance you could take a picture of the strut housings with the front wheel off to get a better look?

[HennaE30]

I have a full Bilstein B12 kit on my car if you'd consider a tradesies? Not sure if the Eibach Races are spec legal though. Bavauto has all the part numbers you need to cross check if you need to. Curious whether the strut housing are the ground control ones that are reinforced or if they are just stock housings with threaded perches and link tabs welded on. Also curious about rust... any chance you could take a picture of the strut housings with the front wheel off to get a better look?

I'm assuming your referring to SpecE30. No Eibachs are not spec legal. The spec springs are H&R Race springs.

I may be interested in camber plates.. Depending on a multitude of aspects.

[zcenterb]

^ Just found the rules, thanks.

Sorry OP, GLWS

[laxplayermjd]

for anyone wanting the coil overs, the front perch was welded to the strut housing. i assume this will need to be purchased from them or i can include the strut housings with the sale.

[laxplayermjd]

the perch pieces are $9 each from ground control so shortly ill be taking the coils and plates off and selling as a set.

[Artful Dodger]

do you still have the camber plates?