Built e30 Part out.. Held fund Spec e30 build!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jb325is
    R3VLimited
    • Oct 2003
    • 2137

    #1

    Built e30 Part out.. Held fund Spec e30 build!

    Selling all of the cool stuff off of my car to go racing. Drivetrain is sold, getting rid of the rest of it so I can build this thing into a spec e30. I'll update this list as it goes, I have a couple people with right of refusal on some of the bigger stuff (coilovers/5 lug), but if something falls through I'll be sure to add them here


    Complete 5 lug/brake setup available- $1200
    -NASIEG 5 lug kit
    -e30 m3 rear hubs ($$$)
    -FAG e36 m3 front hubs
    -FAG e30 rear bearings
    -e46 m3 front calipers (w/ SS lines) (Ferodo DS2500 pads 60%)
    -e39 540i Aluminum rear calipers (w/ SS lines)
    -e46 m3 PFC direct drive 2 piece rotors
    -e46 325i rear rotors
    -1.5-2" (can't remember) shortened e30 struts with ready for sleeves

    Not taking apart the trailing arms, so I'd prefer local sale. Hubs and bearings all have less than 3k miles

    Moonroof and all associated parts- $400 (SOLD)

    Immaculate crack free dash- $125... If this doesn't sell it's going to get holes cut in it, which would be a shame (sold)

    6-10 e30-8 by Jonathan braswell, on Flickr

    Staggered Turbines (17x8/17x9) with very recent 215/45 and 245/40 Bridgestone RE760- $1400 (SOLD)
    6-10 e30 by Jonathan braswell, on Flickr

    I also have some sets of slicks (Continental and Toyo RR that I would sell with these)

    I will also be selling on of the seats shown. Probably the MOMO Start (passenger). They are both mounted on Massive slide mounts, which would be included.

    Ground Control Coils. 550/750 with GC re-vavled SHORT Koni's. Race camber plates, billet RSMs. I had to hold one of the rear adusters with channel locks on time and it marred the threads pretty good, but I held them with a rag on the top of the adjuster and it's pretty out of the way. $1000 (SOLD)
    coilovers by Jonathan braswell, on Flickr
    Last edited by Jb325is; 09-24-2015, 03:22 AM.
    - '88 m54 coupe

    <3
  • agent
    Vice Grand Pubaa
    • Mar 2010
    • 7960

    #2
    PM sent.
    Originally posted by kronus
    would be in depending on tip slant and tube size

    Comment

    • ButtJuice
      R3VLimited
      • Dec 2009
      • 2609

      #3
      Pmed.
      sigpic

      1999 528it - Daily Driver “Dad Wagon”
      1991 325is - 2.8L Budget Stroker Garage Slut
      1991 318is - Sold
      1986 325 - Sold

      Instagram - Lamoursum

      Comment

      • Shangsta
        E30 Fanatic
        • Aug 2010
        • 1485

        #4
        Are you selling the adapter kit and brake components? nvm just read the right of refusal part but if that fall through let me know please
        Originally posted by blunttech
        Levent guzzles vanilla hazelnut creamer like its my semen
        :shock:

        Comment

        • rcsoundn1
          No R3VLimiter
          • Nov 2012
          • 3361

          #5
          PM me about the dash

          Comment

          • GunMetalGrey
            E30 Fanatic
            • Dec 2010
            • 1499

            #6
            What is the offset on the rear wheels?

            Comment

            • Jb325is
              R3VLimited
              • Oct 2003
              • 2137

              #7
              ET22, they are e34 fitment
              - '88 m54 coupe

              <3

              Comment

              • 318aye
                E30 Modder
                • Jun 2010
                • 895

                #8
                Shifter?
                sigpic

                Comment

                • Jb325is
                  R3VLimited
                  • Oct 2003
                  • 2137

                  #9
                  Keeping it in the car
                  - '88 m54 coupe

                  <3

                  Comment

                  • VitalkaE30
                    Wrencher
                    • Aug 2012
                    • 238

                    #10
                    PM'd

                    Comment

                    • mbonder
                      R3VLimited
                      • Feb 2004
                      • 2255

                      #11
                      What did you need to do to the fenders to fit the wheels?

                      Comment

                      • Jb325is
                        R3VLimited
                        • Oct 2003
                        • 2137

                        #12
                        Depends on the 5 lug setup you use, with mine they are stock e30 offsets in the rear, and essentially a 12mm spacer in the front, fits fine, but the tires are pretty tall and limit how low you can go. It would be very easy on an early model
                        - '88 m54 coupe

                        <3

                        Comment

                        • Beau B
                          Mod Crazy
                          • Mar 2004
                          • 734

                          #13
                          Pm sent
                          1988 BMW 325iS

                          Comment

                          • gills
                            Wrencher
                            • Jan 2006
                            • 275

                            #14
                            S54 setup is already gone?

                            Comment

                            • gills
                              Wrencher
                              • Jan 2006
                              • 275

                              #15
                              and do you have the cardinal rear seats by any chance?

                              Selling the door cards or carpet?

                              Comment

                              Working...