VAC baffled 24v swap pan

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • arch4ngel
    Mod Crazy
    • Dec 2008
    • 791

    #1

    VAC baffled 24v swap pan

    I have for sale a front sump oil pan from an e34 525i.
    Included is the pan and pickup.
    Dipstick and dipstick tube have been sold.

    The pan was hot tanked and professionally cleaned before a VAC pan baffle was installed.
    https://store.vacmotorsports.com/vac...m52-p2136.aspx
    Now, after a long wait and R&D, we have this baffle available for our friends with E34's and E30's with M5x/S5x swaps!
    This baffle is designed to keep oil surrounding the pick-up at all times. Under hard cornering and acceleration loads our baffle keeps many of the fastest BMW's in the world alive.
    This part is VITAL as a significant loss of oil pressure will lead to catastrophic engine failure. A must have if you track your BMW.
    I ran the pan for about 700 miles before swapping with an arc asylum rear sump pan due to BAR regulations.

    I'd like $350 shipped for everything.



    Last edited by arch4ngel; 11-06-2015, 03:21 PM.
    Project
    Feedback
  • arch4ngel
    Mod Crazy
    • Dec 2008
    • 791

    #2
    bump
    Project
    Feedback

    Comment

    • arch4ngel
      Mod Crazy
      • Dec 2008
      • 791

      #3
      bump
      Project
      Feedback

      Comment

      • arch4ngel
        Mod Crazy
        • Dec 2008
        • 791

        #4
        bump
        Project
        Feedback

        Comment

        • arch4ngel
          Mod Crazy
          • Dec 2008
          • 791

          #5
          buy me
          Project
          Feedback

          Comment

          • arch4ngel
            Mod Crazy
            • Dec 2008
            • 791

            #6
            bump
            Project
            Feedback

            Comment

            • arch4ngel
              Mod Crazy
              • Dec 2008
              • 791

              #7
              New pics bump
              Project
              Feedback

              Comment

              • 4DR_Lou
                Advanced Member
                • Jan 2011
                • 158

                #8
                I would have likely purchased this. Couple days too late.
                Someone buuuyy eettttt!
                1990 325i - Current Project
                2007 Triumph Speed Triple 1050

                Comment

                • arch4ngel
                  Mod Crazy
                  • Dec 2008
                  • 791

                  #9
                  bump
                  Project
                  Feedback

                  Comment

                  • arch4ngel
                    Mod Crazy
                    • Dec 2008
                    • 791

                    #10
                    Bump.
                    If any obd1 folks are considering this I'll split the dipstick tube from the pan.
                    Project
                    Feedback

                    Comment

                    • KoKoSe7eN
                      Wrencher
                      • Oct 2011
                      • 253

                      #11
                      Oil pan a BAR concern? They told you it failed?
                      sigpic
                      91' MtechII AW/SW BAR'd S52/SC

                      Comment

                      • exhaust
                        E30 Addict
                        • Jun 2015
                        • 411

                        #12
                        How much for just the dip stick?

                        Comment

                        • 4DR_Lou
                          Advanced Member
                          • Jan 2011
                          • 158

                          #13
                          I also need just the dipstick tube.. see my thread on what happened to mine
                          1990 325i - Current Project
                          2007 Triumph Speed Triple 1050

                          Comment

                          • arch4ngel
                            Mod Crazy
                            • Dec 2008
                            • 791

                            #14
                            Originally posted by KoKoSe7eN
                            Oil pan a BAR concern? They told you it failed?
                            I failed because of my exhaust setup, oil pan was part of the solution.
                            Details are in my project thread.

                            PMs sent to people interested in the dipstick.
                            Project
                            Feedback

                            Comment

                            • arch4ngel
                              Mod Crazy
                              • Dec 2008
                              • 791

                              #15
                              Dipstick tube sold, pan still available.
                              Project
                              Feedback

                              Comment

                              Working...