I have a brand new LUK Dual Mass M50 flywheel with clutch disc and pressure plate. This will fit an M20 too, but it does not have the reference sensor needed to run for an e motor. If you have a late model (86 / 87) getrag 260 manual transmission with the 1/2" longer bell housing and are doing an i swap or building a stroker, or an M50 swap and want to have a really smooth clutch this is the flywheel setup you need.
The stuff was mounted in an e30 but never driven and has been sitting around for a while so the flywheel does show some light rust on the outside, but the working side is nice and everything is new.
Just the flywheel sells for $400 so if you get this setup you will be able to get the clutch disc and pressure plate for free.
$400 + shipping for everything.
Pics...http://www.r3vlimited.com/board/album.php?albumid=2313
PM me if interested!
The stuff was mounted in an e30 but never driven and has been sitting around for a while so the flywheel does show some light rust on the outside, but the working side is nice and everything is new.
Just the flywheel sells for $400 so if you get this setup you will be able to get the clutch disc and pressure plate for free.
$400 + shipping for everything.
Pics...http://www.r3vlimited.com/board/album.php?albumid=2313
PM me if interested!
Comment