SOLD BimmerHeads 885 with BN Schrick 272 Cam - FRESH FROM BIMMERHEADS

[phenryiv1]

SOLD SOLD SOLD

Fresh, never used BimmerHeads 885 head with a brand new Schrick 272 cam installed. Regular BimmerHeads service- HD rockers, port / polish, matched double valve springs, all seals/guides replaced, etc.


Same services as shown here: http://www.bimmerheads.com/product-c...ylinder-heads/


This has NEVER BEEN INSTALLED. I had it built last year and was going to install it on a resealed bottom end over the winter but a buddy who was racing a SETA/885 combo that is built similarly (minus the cam) had a rear-end collision and sold me the motor so I don't need this.


$1500

Price is negotiable but don't be crazy.

This was done before they had the different tiers of service. It is (for the most part) the touring service, but it was ported and polished.

Services were:

Cleaning
Pressure testing
Resurfacing
Valve grinding & valve seat grinding (3-angle, I believe)
ALL valve guides replaced
New valve seals & cam seals
New intake studs & new exhaust studs
New rocker arm hardware & eccentrics
New cam gear, cam gear cover, and rotor mount
New Heavy Duty rocker arms

Additionally, the port and polish was done and a full set of matched double valve springs were installed. Shant (the machinist) used some sort of spring force measuring tool (I have NO idea what it is) to match the springs. I had ordered Schrick springs but Schrick sent the wrong ones so Shant matched up a full set of OEM springs. I never asked if they were new or used- I just know that he called me and explained the situation and said he installed what he would have done for his own car if he were me. And he did not charge more for that part of the service so I was fine with it.

I also have:


BNIB head gasket
M50 injectors
173 DME with chip

[AwakenNoMore]

Alright, so what IS the price you are aiming for exactly?

[phenryiv1]

Alright, so what IS the price you are aiming for exactly?

$1500. Not sure how it did not show up when I created the post but I edited it.

I am in this for $1900 with the cam and the head and all of the work to it. $1500 is near the LOW end of the BimmerHeads price range and this was not merely the lowest service. On top of that, you get the head itself and no core charge or core cost.

[duval7]

What type of power increase will this provide?

[phenryiv1]

What type of power increase will this provide?

Increase is the same as adding 17 fanboi stickers.



Okay, seriously...I don't know. It depends on what you do for supporting mods. With the chip, cam, injectors, and a fresh head, you might see 10-15 HP, but again it all depends on your baseline.

Putting this on an SETA 2.7L bottom end will add 40-50 HP. Putting to on an otherwise solid (but stock) M20B25 might be 10-12.

[snakeye]

Message sent

[phenryiv1]

SOLD.

Close thread.