Selling off parts that I no longer need for my swaps. All prices are OBO and shipping is NOT included.
Ireland Engineering M30 Ceramic Coated Headers - New/Uninstalled ($565 new): $490
Miller MAF & War Chip Combo for M30 / 179 ECU - New/Uninstalled ($755 new): $700
Used M20 Shorty Headers. They appear to be IE shorty headers without ceramic coating/painted. Ran great on my 325is: $100
Garagistic - e30 M50/52/S50/52 Gt260 transmission Swap Brace. New/Uninstalled ($74 new): $60
M30B35 Ported Polished Head / 285 Cam by Bimmerheads Freshly Rebuilt/Uninstalled ($1750 new): $1400
E34 Clutch Kit Part #: 21-21-1-223-135-M38 from Pelican Parts - New/Uninused ($263.50 new): $220
Massive BBK e36 318ti and 323Ti Rear 310x32mm kit - New/Uninstalled: $1200
These are great for those of you with e36 five lug with and want to balance out the rear.
SSSquid Pretuned ECU for e30 327i 2.7i with cleaned/flow matched fuel injectors - new/uninstalled $250
Garagistic BMW E30 M30/S38 Swap Motor Mounts - new/uninstalled $180
ABS Hydro Pump and Control Unit - Used $50
Also, see the e30 M3 parts I'm selling in the M3 Classifieds (reupholstered front/rear seats, full suspension, carbon fiber rear wing...)
Parts sold so far:
SOLD Used s54 Typhoon standalone swap kit $1000 (bought from Skillt here) Includes:
Complete kit with:
-Custom made wiring harness ''Plugs straight to x20, Little mod is needed to convert to c101 for e30s''
-standalone Typhoon ECU from ''specialist components uk'' Uploaded with stock s54 map, I also have a dyno improved map ''would not run it as everys54 is different''
-CanBus connecting hardware and software.
-USB extension dual outlet cable.
-Modified vanos solenoid control unit to run with the standalone ''MODDED to accept different signal and adjust vanos, WILL NOT WORK ON STOCK S54 WITH MSS54''
-CSL inlet air temp sensor
-3 Pron map sensor ''not used'' FOR anyone wanting to run a hybrid ALPHA N setup
-VAC MOTORSPORT cable trottle conversion kit ''MODDED, HARDWARE CORRECTED TO CORRECT THE STICKY THROTTLE FEEL'' done so well it feels 20% heavier then original throttle feel with stock engine.
- Podi oil and water sensors ''extra''
-AEM wideband/ Gauge
Total cost of this setup was over 2500$ and that's without the wiring harness or the podi gauge, AEM wideband or the man hours to put it together.
SOLD Econoboost v2 - New/Uninstalled. $90
SOLD KAMotors Cold Air Intake v4 - new/uninstalled $95
SOLD Husco Armrest in very good used condition. I'll include the center console piece that it mounts to so you don't have to drill into yours. Vinyl is pretty much perfect, cup holders both have the metal retainers: $250
Pics:
I.E. Ceramic Coated Headers / M30
Miller MAF & War Chip Combo for M30 / 179 ECU
Used M20 Headers
Garagistic - e30 M50/52/S50/52 Gt260 transmission Swap Brace
BMW E34 Clutch Kit Part #: 21-21-1-223-135-M38
M30B35 Ported Polished Head / 285 Cam by Bimmerheads
SSSquid Pretuned ECU for e30 327i 2.7i with cleaned/flow matched fuel injectors
Garagistic BMW E30 M30 SWAP MOTOR MOUNTS
Ireland Engineering M30 Ceramic Coated Headers - New/Uninstalled ($565 new): $490
Miller MAF & War Chip Combo for M30 / 179 ECU - New/Uninstalled ($755 new): $700
Used M20 Shorty Headers. They appear to be IE shorty headers without ceramic coating/painted. Ran great on my 325is: $100
Garagistic - e30 M50/52/S50/52 Gt260 transmission Swap Brace. New/Uninstalled ($74 new): $60
M30B35 Ported Polished Head / 285 Cam by Bimmerheads Freshly Rebuilt/Uninstalled ($1750 new): $1400
E34 Clutch Kit Part #: 21-21-1-223-135-M38 from Pelican Parts - New/Uninused ($263.50 new): $220
Massive BBK e36 318ti and 323Ti Rear 310x32mm kit - New/Uninstalled: $1200
These are great for those of you with e36 five lug with and want to balance out the rear.
SSSquid Pretuned ECU for e30 327i 2.7i with cleaned/flow matched fuel injectors - new/uninstalled $250
Garagistic BMW E30 M30/S38 Swap Motor Mounts - new/uninstalled $180
ABS Hydro Pump and Control Unit - Used $50
Also, see the e30 M3 parts I'm selling in the M3 Classifieds (reupholstered front/rear seats, full suspension, carbon fiber rear wing...)
Parts sold so far:
SOLD Used s54 Typhoon standalone swap kit $1000 (bought from Skillt here) Includes:
Complete kit with:
-Custom made wiring harness ''Plugs straight to x20, Little mod is needed to convert to c101 for e30s''
-standalone Typhoon ECU from ''specialist components uk'' Uploaded with stock s54 map, I also have a dyno improved map ''would not run it as everys54 is different''
-CanBus connecting hardware and software.
-USB extension dual outlet cable.
-Modified vanos solenoid control unit to run with the standalone ''MODDED to accept different signal and adjust vanos, WILL NOT WORK ON STOCK S54 WITH MSS54''
-CSL inlet air temp sensor
-3 Pron map sensor ''not used'' FOR anyone wanting to run a hybrid ALPHA N setup
-VAC MOTORSPORT cable trottle conversion kit ''MODDED, HARDWARE CORRECTED TO CORRECT THE STICKY THROTTLE FEEL'' done so well it feels 20% heavier then original throttle feel with stock engine.
- Podi oil and water sensors ''extra''
-AEM wideband/ Gauge
Total cost of this setup was over 2500$ and that's without the wiring harness or the podi gauge, AEM wideband or the man hours to put it together.
SOLD Econoboost v2 - New/Uninstalled. $90
SOLD KAMotors Cold Air Intake v4 - new/uninstalled $95
SOLD Husco Armrest in very good used condition. I'll include the center console piece that it mounts to so you don't have to drill into yours. Vinyl is pretty much perfect, cup holders both have the metal retainers: $250
Pics:
I.E. Ceramic Coated Headers / M30
Miller MAF & War Chip Combo for M30 / 179 ECU
Used M20 Headers
Garagistic - e30 M50/52/S50/52 Gt260 transmission Swap Brace
BMW E34 Clutch Kit Part #: 21-21-1-223-135-M38
M30B35 Ported Polished Head / 285 Cam by Bimmerheads
SSSquid Pretuned ECU for e30 327i 2.7i with cleaned/flow matched fuel injectors
Garagistic BMW E30 M30 SWAP MOTOR MOUNTS
Comment