revshift 24v adapter guibo
My s52 e30 recently became my DD, before i got to slam a zf320 in it that i acquired. G260 is better as a daily then ZF for me. so the ZF was sold to someone needing one for their e36. hence, I was left with this. $100 Shipped - New in packaging.
This is for adapting the zf320 output flange, to the e30 325i small driveshaft flange. depending on the output flange on your zf, it maybe necessary to remove a few mm of material where the driveshaft bolts would over lap on the output flange. Info from Revshift list below. Check their website fact sections for details.
PS I also was told this will work with the m30 G260/6 to the small flange e30 drive shaft.
"This flex disc is for a 1983-1991 E30 BMW 3-series with an M50/M52/S50/S52 engine swap. It adapts the 96mm/12mm ZF transmission flange to the 78mm/10mm E30 driveshaft. It allows you to retain the oem 325i driveshaft when doing a 24v engine and ZF transmission swap. (Not compatible with the 4-cylinder driveshaft)
The Revshift race flex disc frame is made from 6061 aluminum with type III hard anodizing and utilizes high quality polyurethane bushings to maximize stiffness and strength while maintaining an appropriate amount of flex.
FOR RACE USE ONLY! This part is very rigid and requires precise installation. The driveline must be properly aligned and all driveline components must be in good condition."
Mike
List Date: 1/29/2017
For more info, click here to view the original listing: revshift 24v adapter guibo
--------------------------------------
This item is no longer available.
--------------------------------------
My s52 e30 recently became my DD, before i got to slam a zf320 in it that i acquired. G260 is better as a daily then ZF for me. so the ZF was sold to someone needing one for their e36. hence, I was left with this. $100 Shipped - New in packaging.
This is for adapting the zf320 output flange, to the e30 325i small driveshaft flange. depending on the output flange on your zf, it maybe necessary to remove a few mm of material where the driveshaft bolts would over lap on the output flange. Info from Revshift list below. Check their website fact sections for details.
PS I also was told this will work with the m30 G260/6 to the small flange e30 drive shaft.
"This flex disc is for a 1983-1991 E30 BMW 3-series with an M50/M52/S50/S52 engine swap. It adapts the 96mm/12mm ZF transmission flange to the 78mm/10mm E30 driveshaft. It allows you to retain the oem 325i driveshaft when doing a 24v engine and ZF transmission swap. (Not compatible with the 4-cylinder driveshaft)
The Revshift race flex disc frame is made from 6061 aluminum with type III hard anodizing and utilizes high quality polyurethane bushings to maximize stiffness and strength while maintaining an appropriate amount of flex.
FOR RACE USE ONLY! This part is very rigid and requires precise installation. The driveline must be properly aligned and all driveline components must be in good condition."
Mike
List Date: 1/29/2017
For more info, click here to view the original listing: revshift 24v adapter guibo
--------------------------------------
This item is no longer available.
--------------------------------------
Comment