Complete Megasquirt M30 / M20 Setup $1000.

[justinpirie]

Now SOLD!

I’m going to put a V8 in my E30 next so I’m putting my complete M30/M20 Megasquirt setup for sale. I’ve put hundreds of hours into this setup so it’s as near plug-and-play as you could possibly get with MS with a custom wiring loom. It’s set up for coil on plug full sequential and is perfect for boosted applications or more power than the standard Motronic can handle. Especially where you want more sensors or control than the stock harness can handle.

I’ve built a custom coil on plug mount for the M30 rocker cover and 3D printed a custom TPS adapter.

MS Wiring harness $83 https://www.diyautotune.com/product/...ms2-ms3-ready/
MS3X Wiring harness $86 https://www.diyautotune.com/product/...ness-for-ms3x/
Cam sensor $53.45
Cam sync plate $146.13
Spark Plug Leads $56.99
Bosch EV1 injector connectors $62.00
Coil connectors $30.35
Intake Aluminum Pipe $19.99
Brand new K&N 3” filter $36.70
LSX Ignition coils $147.38
GM IAT $22.49 https://www.diyautotune.com/product/...-with-pigtail/
30lb Injectors $100
M50 TPS $38
3D Printed TPS Adaptor plates x2 $40
Aluminum sheet for coils $33.52
Shipping $44

$1000

All you need to add is a wideband O2 sensor, power and a fuel pump connection and you are good to go!

If you want the MS with the Tune installed: MS MS3X- pre built $692 https://www.diyautotune.com/product/...-57-assembled/

This is my cost on the MS so I can put one in the next project but to help you get up and running quickly.

[justinpirie]

More pictures

Pics of the custom M30 mount, cam sync plate and TPS adaptor.

Pic of it installed in my race car using my old M20 mount hacked up to work on the M30.

More pics of the actual loom coming.

[evoDRichie]

so its 1700 for everything including the MS ECU

[justinpirie]

Correct!

[justinpirie]

Sold! :d

[CharMick]

LS coil plate

Do you have any pictures of the bracket you made for the LS coils? Looking to fab something up for mine....

[justinpirie]

Absolutely!

https://photos.app.goo.gl/ywhscYbKhgiK6RcG8

https://photos.app.goo.gl/WYo3zoiSQLfQtiD67

https://photos.app.goo.gl/VUvd46f9KjYNpcV77

I think there's someone on Rev that makes really nice brackets though.

[justinpirie]

@charmic do you need any coils, wires or connectors? I have 2 spare of each because you have to buy 4 or 8!