5 Lug and Big Brake Kit

[elcoy]

Elcoy
I've contacted you before
But just wondering, by any chance do you see a group buy for this in the future?
Or once they're gone that's it?
I ask because I only need the front setup
Hell if there's a group buy I'll buy a full set and fronts if I need to cover a slot lol
Thanks in advance

In the past I have done pre-sales when I go to have more parts machined.

I have some in stock still and could sell just a front kit. Ill send you a PM.

[elcoy]

bump!

[LowR3V'in]

Does the abs still work with this kit i don't remember.

[elcoy]

Does the abs still work with this kit i don't remember.

Yes!


Sent from my iPhone using Tapatalk

[elcoy]

Bump, only have a few left in stock!

[wspellmann]

I ordered this kit from you about 2.5 years ago and I'm FINALLY getting around to installing it. I have an issue with the front caliper brackets though. The included bolts (M12x32mm) aren't long enough to engage the full amount of threads in the locking nuts. I can't see, but by feel alone it seems as if there is at least 1/3 to 1/2 of the threads on the nuts not engaged. This also means the "locking" part of the nut isn't engaged. Is this how the kit is supposed to bolt up? If not, I'll likely just go get a set of 4 M12x 35 or 40mm bolts since I have a fastener store not too far away.

[LowR3V'in]

mine where not the right size also but it's good because they are 8.8 instead of 10.9 so just get better hardware from the store.

[wspellmann]

About using z3 hubs... is it exactly 2mm to be shaved off the caliper brackets? I'll get a machine shop to modify them, I just want to be 100% sure of what to remove. Money is getting VERY tight on my project and I already have a set of z3 hubs so I'd rather not spend $500+ on M3 hubs.

[Holland]

Old bump, but are any of these kits floating around anymore?