M20 2.7 eta, “ e to I conversion “
( this is for the following only and does NOT include shortblock )
euro 731 head casting, pressure tested, surfaced, recent full refresh, new valve guides, seals, 3 angle valve job, valves seats all hand lapped. Schneider regrind 284 degree cam, IE rocker arms, IE valve springs, mild porting with matching port matched “I” intake.
173 dme with sssquid stroker chip , 19# injectors and m30 afm .
approx 2500 miles since machine work, removed to return car to stock ( CA smog sucks)
$750.00
* can provide correct “I” engine harness and triggered harmonic balancer for
additional $250
E28/E34 m20 OBX headers with downpipes.
Purchased and used for fitment testing only.
ebay listed @ $400 and up.
$275.00
M54b30/s52 forged crankshaft. Standard journals, magnafluxed, polished, checked for straightness
$325. , rods and pistons also available
e34 m5 ,
oem oil cooler radiator part #17212226810, pressure tests ok, no occlusion or visible damage
$ 300
e32/34, 535/735
oem oil cooler radiator part#17201712015, pressure tests ok, no occlusion or visible damage
$ 200
3 spoke sport steering wheel,
course spline ( pre 9/85) leather fair, stitching intact, call it a 7 on a scale of 1-10
$65.
Oil pan, m20, e30 fitment. Crack free, drain plug threads good.
$130
E30 a/c system components ,
hoses, condenser, aux fan. Receiver dryer, compressor. All know to be working good before track rat removal
$150
E34 “big” sway bars
6cyl only . will not clear V8 oil sump
1 set oem 25/18mm with bushings
$200
1 set oem 25mm frt/19mm RD adj rear
$250
shipment on all available at your expense, all parts located in so-cal
pics on request....more goodies to follow as they are pulled from shelf/storage.
( this is for the following only and does NOT include shortblock )
euro 731 head casting, pressure tested, surfaced, recent full refresh, new valve guides, seals, 3 angle valve job, valves seats all hand lapped. Schneider regrind 284 degree cam, IE rocker arms, IE valve springs, mild porting with matching port matched “I” intake.
173 dme with sssquid stroker chip , 19# injectors and m30 afm .
approx 2500 miles since machine work, removed to return car to stock ( CA smog sucks)
$750.00
* can provide correct “I” engine harness and triggered harmonic balancer for
additional $250
E28/E34 m20 OBX headers with downpipes.
Purchased and used for fitment testing only.
ebay listed @ $400 and up.
$275.00
M54b30/s52 forged crankshaft. Standard journals, magnafluxed, polished, checked for straightness
$325. , rods and pistons also available
e34 m5 ,
oem oil cooler radiator part #17212226810, pressure tests ok, no occlusion or visible damage
$ 300
e32/34, 535/735
oem oil cooler radiator part#17201712015, pressure tests ok, no occlusion or visible damage
$ 200
3 spoke sport steering wheel,
course spline ( pre 9/85) leather fair, stitching intact, call it a 7 on a scale of 1-10
$65.
Oil pan, m20, e30 fitment. Crack free, drain plug threads good.
$130
E30 a/c system components ,
hoses, condenser, aux fan. Receiver dryer, compressor. All know to be working good before track rat removal
$150
E34 “big” sway bars
6cyl only . will not clear V8 oil sump
1 set oem 25/18mm with bushings
$200
1 set oem 25mm frt/19mm RD adj rear
$250
shipment on all available at your expense, all parts located in so-cal
pics on request....more goodies to follow as they are pulled from shelf/storage.
Comment