NEW T3/T4 Turbo w/ 8.3psi IWG

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SoopaGhetto
    E30 Addict
    • May 2006
    • 573

    #1

    NEW T3/T4 Turbo w/ 8.3psi IWG

    This is a brand new NVR BEEN USED T3/T4 Turbo. I bought it to use on my 318i but still need to put in the MS unit and tune it well...its just sitting in my room looking at me. (i hate being stared at) Plus i need a manifold. i will take 200 for it; i know this isnt a holset but i hope somebody might want it.


    Specs (this is stamped all over the turbo):
    Type: T04E
    PartNo: T3/T4-1
    SerialNo: KD0600730
    Compressor housing (cold): A/R .60 (2inch in)
    Exhaust housing (hot): A/R .63 (3inch out)
    Internal gate: 8.3psi
    i also have gaskets for the oil inlet, outlet, and turbo

    The thing I like about this turbo is that it has a V-Band exhaust


    some pics:









    Its kinda hard to see but you can make out A/R .63






    those are all the pics but i can take more if needed

    If you have any questions just ask!
    ?
  • euroshark
    No R3VLimiter
    • Apr 2006
    • 3491

    #2
    You need macro, B. Good luck! I'd buy this up if I had extra money for my E28 right now...
    '88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5

    Comment

    • SoopaGhetto
      E30 Addict
      • May 2006
      • 573

      #3
      wats macro? picture sizerrrr?
      ?

      Comment

      • Rennsport
        R3VLimited
        • May 2006
        • 2139

        #4
        Internal gate: 8.3psi

        does this mean that it has a set BO at 8.3/will only spool up to 8.3psi?
        m106 1990 e30
        e36 daily
        e32 cruiser

        Comment

        • Mr Deagle
          E30 Enthusiast
          • Nov 2006
          • 1121

          #5
          unless you feed pressure into the top of the wg actuator, yes.....bump for a lonely turbo

          Comment

          • SoopaGhetto
            E30 Addict
            • May 2006
            • 573

            #6
            This turbo could easily do 25-30 psi (at least that was advertised) You would need to get a boost controller though
            ?

            Comment

            • SoopaGhetto
              E30 Addict
              • May 2006
              • 573

              #7
              :ohsnap: ....but this motha up!
              ?

              Comment

              • SoopaGhetto
                E30 Addict
                • May 2006
                • 573

                #8
                i wouldnt mind trading for a M10 (2.0L preferably) someone dont want anymore
                ?

                Comment

                • SoopaGhetto
                  E30 Addict
                  • May 2006
                  • 573

                  #9
                  i can bump this
                  ?

                  Comment

                  • ZiMMie
                    E30 Modder
                    • Jun 2004
                    • 968

                    #10
                    where are the M10/M30 Owners.

                    sorry but i cant get this out of mind after reading it.

                    M30/M10 Screams "BLOW ME" :P

                    www.stancefactory.com

                    Comment

                    • Garageaholic
                      Freestyle Fabricator
                      • Dec 2005
                      • 5204

                      #11
                      Is it absolutely imperative that you install the turbo gasket? (the square silver one). because when i installed my turbo this weekend, the guy at TCD said that that gasket is not necessary.
                      Recent Rebranding!!
                      Visit Garageaholic for all of your E30 Swap Needs!
                      E30 SM62/S62
                      E30 M60 V8
                      E30 M30 Big 6!




                      Check out this E36 N54 Swap Build
                      Instagram.com/garageaholic
                      Youtube.com/garageaholic

                      Comment

                      • SoopaGhetto
                        E30 Addict
                        • May 2006
                        • 573

                        #12
                        i would assume so...wouldnt that allow the manifold and turbo to seal properly? heat expansion could warp a lil once its nice and hott
                        Last edited by SoopaGhetto; 01-06-2007, 10:38 PM.
                        ?

                        Comment

                        • SoopaGhetto
                          E30 Addict
                          • May 2006
                          • 573

                          #13
                          Originally posted by ZiMMie
                          where are the M10/M30 Owners.

                          sorry but i cant get this out of mind after reading it.

                          M30/M10 Screams "BLOW ME" :P


                          :rofl: :rofl: :rofl:
                          ?

                          Comment

                          • SoopaGhetto
                            E30 Addict
                            • May 2006
                            • 573

                            #14
                            Bump!
                            ?

                            Comment

                            • SoopaGhetto
                              E30 Addict
                              • May 2006
                              • 573

                              #15
                              :dot: bump
                              ?

                              Comment

                              Working...