FS: v2.2 megasquirt ecu fully configured!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rs4pro3
    R3V Elite
    • Oct 2003
    • 5808

    #1

    FS: v2.2 megasquirt ecu fully configured!

    I've decided to wait on installing megasquirt on my car for now, as I need cash and the stroker is running just fine on the stock ecu and maf conversion.
    So up for sale is my v2.2 megasquirt ecu I've been slowly piecing together. This ECU is setup for a ton of different options which are listed before
    -Full fuel and spark control running the high resolution code
    -3 coil drivers and heatsink board for waste spark on a 6 cylinder
    -PWM idle control board
    -VR decoder circuit(so you can use the stock 325i crank sensor and 60-2 wheel)
    -Fan control(dedicated driver so that you can set at what temperature to kick on or off an electric fan)
    -constant barometric correction(great for higher elevations)
    Do to all the add on functions they were placed into a seperate ecu case, but both cases are mounted onto a steel bracket and are all pre-wired together. All wiring diagrams are included for hooking up all the extra function to your vehicle. The ecu it self is 100% tested and functioning on the stim board(not in a car), and comes preloaded with a base m20 map that should get the car started.

    Here is a shot of the guts

    And here is a screen shot of it running in megatune

    Asking $325 shipped
    Last edited by rs4pro3; 03-19-2007, 02:35 PM.
    85 325e 2.7 ITB'd stroker
  • cthulu703
    Wrencher
    • Oct 2004
    • 288

    #2
    Man if this was bonus time I would be on this like flies on rice.

    Comment

    • rs4pro3
      R3V Elite
      • Oct 2003
      • 5808

      #3
      so just ask your boss for a bonus what's the worse that could happen :finger:
      85 325e 2.7 ITB'd stroker

      Comment

      • dgmorr
        Noobie
        • Mar 2007
        • 17

        #4
        How much are you looking to get?

        Comment

        • rs4pro3
          R3V Elite
          • Oct 2003
          • 5808

          #5
          Originally posted by rs4pro3
          Asking $325 shipped
          85 325e 2.7 ITB'd stroker

          Comment

          • cactusjacks1
            E30 Fanatic
            • Sep 2004
            • 1216

            #6
            Will it work on the S14 or other BMW 4 cyl. engines?
            [I

            Comment

            • rs4pro3
              R3V Elite
              • Oct 2003
              • 5808

              #7
              yes, it will work on any engine, you can use the current setup as is to control a single stock coil, or up to 3 coils in a waste spark 6 cylinder setup. As for the file loaded it some tweaks etc.. will be needed. As the current file is the one from a friends stroker m20 that I've been tuning.
              85 325e 2.7 ITB'd stroker

              Comment

              • rs4pro3
                R3V Elite
                • Oct 2003
                • 5808

                #8
                bump
                85 325e 2.7 ITB'd stroker

                Comment

                • rs4pro3
                  R3V Elite
                  • Oct 2003
                  • 5808

                  #9
                  bump
                  85 325e 2.7 ITB'd stroker

                  Comment

                  • rs4pro3
                    R3V Elite
                    • Oct 2003
                    • 5808

                    #10
                    back up, someone must want this?
                    85 325e 2.7 ITB'd stroker

                    Comment

                    • psloan
                      R3V OG
                      • Nov 2006
                      • 9815

                      #11
                      Isnt that a huge pulse width?
                      "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."

                      Comment

                      • SchnellerVert
                        No R3VLimiter
                        • Sep 2005
                        • 3948

                        #12
                        Did you try the turbo folks over on e30tech?

                        Comment

                        • euroshark
                          No R3VLimiter
                          • Apr 2006
                          • 3491

                          #13
                          This could come in handy for my 335i... Would you consider a pair of classic black leather Recaros as a trade? They need to be recovered, but they are still awesome seats.
                          '88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5

                          Comment

                          • rs4pro3
                            R3V Elite
                            • Oct 2003
                            • 5808

                            #14
                            Originally posted by psloan
                            Isnt that a huge pulse width?
                            yes but that screen shot is from it running on the stim board and not a real car.

                            Sorry no trades, and ya it's posted over on e30tech also
                            85 325e 2.7 ITB'd stroker

                            Comment

                            • euroshark
                              No R3VLimiter
                              • Apr 2006
                              • 3491

                              #15
                              Do you still have that 335i exhaust for sale?? Sorry I never got back to you on that...
                              '88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5

                              Comment

                              Working...