Intercooler, 5" tach, ECU, Gauges, Tons of nice parts CHEAP!!!!

[Screaming_bmwe30]

Stuff without pictures:

-Fan clutch with decent blade (15K miles on clutch always stored upright)..........25$ shipped

-325i expansion tank. Cheap fix for a leaking one, or to paint without having any downtime. 15$ shipped

-New 325i motor mounts & used good tranny mounts .................. 20$ shipped for motor mounts ......... 10$ shipped for tranny mounts

-Used Guibo's in good condition, perfect spares for turbo cars that regularly go through them. No cracks. .............10$ shipped each (2 available)

-Manual sunroof crank gear assembly (part that the crank handle attatches to...............15$ shipped

-Fuel injector electrical harness with perfect connections, and no corroded wires (a common problem on e30's).........15$ shipped

-325i Airbox's. Good for switching back to stock airbox from a cone filter. Filter not included in box...................20$ shipped each (2 available)

-325i fuel rail. perfect for custom modifying, or installing an extra set of injectors for tuning purposes......................20$ shipped

-325i exhaust manifolds with 1500 degree paint (already cured on engine) ...............................35$ shipped

325i crank wheel. perfect for welding pickup wheels to or grinding down for use with Standalone engine management programs (megasquirt, VEMS)...................30$ shipped

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------


42# Lucas style injectors (have the fastest opening time of any type of injector) with low miles. I ran them for about 6K miles, and the person i bought them from had only used them for 5k miles on a V8 ford. I sold the turbo setup that I was using these to support. I was making around 300whp, and the injector duty cycle was around 76% at power peak running stock fuel pressure while using megasquirt. They are very clean, with good o-rings and they come with all of the plastic protective caps.

-42#/hr at 2.5bar fuel pressure
-Lucas style disk type outlet (fast response)
- ~10k miles of usage
$200 shipped





--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

M20 Valve cover with High temp wrinkle paint. Looks awesome, and perfectly uniform wrinkle. Just an extra valve cover that I sanded and painted awhile ago to put on my m20, but no longer have a car to put it on.

$75 shipped





--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

This is brand new besides a few scratches, so i'm selling it for what I bought it for not including the shipping costs I originally paid. This unit can probably accomodate 300+ hp in cooling efficiency, and probably has acceptable pressure drop taking into account it's internal volume.

--Good unit for mounting behind kidneys (with some modification) or using as a large side mount or front mount..

--12x12x3" core
--Bar Plate construction
--2.5" in/out
--has 4 little bolt holes welded onto core top and bottom for mounting

$100 shipped



--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

5" Autometer autogauge tachometer. Has mounting hardware. Great for drag or road race when you need a bigger gauge face, and a shift light.

- 10K rpm
- Adjustable Shift light
- mounting bracket included

75$ shipped



--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Stock 325i/is/ix U.S. gauges from my 325i with 181K miles. Pending Money order payment

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Mint 325i taillights. SOLD

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

"173" ecu from a '89 325i. Check the bottom of your ecu to make sure the numbers match. This was my trusty backup ecu for troubleshooting purposes, but I now have 3 of them, so i selling one since i don't need that many.

$40 shipped



--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Good working Master cylinder with Brake booster off my '89 325i. SOLD

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Set of 325i pistons and rods. SOLD


--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Clean Auto transmission from an '89 325i (this 325i had 125K miles on it). Tranny lines to radiator were leaking, so instead of fixing, i just removed this tranny, and did a manual swap to the car. I have the auto driveshaft as well if needed.

Pickup only (Cincinnati, OH 45220)

25$ (need this gone bad before I move)



--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Reference Sensor for 325i. SOLD

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

2.5 bar Fuel pressure regulator. Great for letting the ecu adjust to larger injectors, or replacing your FPR on an eta motor. I use the 2.5bar regulator whenever i'm running 24# injectors with stock electronics

20$ shipped (1 available)

[X_WizarD_X]

PM'd about the tails....

[Shurian]

do u have crank position sensor and abs sensor?pm me with prices.tnk u

[asubimmer]

is there anything wrong w/ the cluster? and can take off those white covers or are they glued on?

[Dominic49]

i'll take the tach... where to i send money?

[Screaming_bmwe30]

is there anything wrong w/ the cluster? and can take off those white covers or are they glued on?

I just popped the needles off, and then used the stock screws to attatch the faces. It was soo long ago when i did that, I couldn't tell you how, but i'm pretty sure once you start messing with it, it shouldn't be hard to return it to stock.

I sent you a pm with my payment info if you still want them.

[Jesse30]

i'll take the cluster.

ygpm

[Screaming_bmwe30]

All pm's responded to. Tons of new parts added. PM me for payment info or questions.

updated 5/20

[Jean]

I'll take the Good working Master cylinder with Brake booster off . PM me.

[Screaming_bmwe30]

Tons of parts left. Updated ones that are sold, or awaiting payment. All parts are OBO, so make me an offer...I need all of this stuff GONE!!

[X_WizarD_X]

When wll item's ship and/or will we be notified?