Parting 1991 318is
Collapse
X
-
looking for:
- 6-button OBC with intact LCD
- central control locking unit (located behind driver kick panel)
- little rubber seal that surrounds hinge on driver's door (circled below in red but on drivers side)

thanks
-micahComment
-
I got my parts today, perfect... Thanks and good luck with the rest of the part out.sigpic
New website releasing soon www.gutenparts.com Guten Parts + Service | Facebook | Twitter
____________________________________
Levent
%20levent@gutenparts.com
____________________________________
Ladies:
1998 E36 m3/4/5 1988 325i 1989 325iTComment
-
do you have the shadow line trim?My 2.9L Build!

Originally posted by Ernest HemingwayThere are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.Comment
-
Which wiring harness? The main on that goes from front to back, or specific portions of it? The main harness is still in, as I have not removed the portion that goes under the back seat to the fuel pump yet. That should be this week. But, I have someone already querying me about it. I'll let you know. Please PM me a reminder.John in MD - 1991 318is
190k miles and still rolling!
Comment
-
I need the plastic trim piece that goes on the edge of the floor, the drivers side. It is the piece that almost goes up against the door, but doesn't, because there is a rubber piece to do that.
I also need screws and nuts for everything that has to do with the gauge cluster trim, previous owner must have lost all of them except for like 2, which currently hold that in!
Comment
-
You are #2 for that trim piece, and I can't help you on the screws for the IC - all the interior screws went into a baggie that went onto my workbench. Never know when you might lose a screw, so I hang on to them! :)I need the plastic trim piece that goes on the edge of the floor, the drivers side. It is the piece that almost goes up against the door, but doesn't, because there is a rubber piece to do that.
I also need screws and nuts for everything that has to do with the gauge cluster trim, previous owner must have lost all of them except for like 2, which currently hold that in!
John in MD - 1991 318is
190k miles and still rolling!
Comment
-
-
Comment



Comment