Part Out: Low mileage 5-spd '92 325i Convertible

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JonathanJ.
    Advanced Member
    • Aug 2007
    • 145

    #1

    Part Out: Low mileage 5-spd '92 325i Convertible

    - Parting Out -
    1992 325i Cabrio E30

    Only 108,000 miles, 5-speed manual, laguna green, good 14" weaves, etc.

    Running vehicle, drove home just fine from small fender-bender. Vehicle was hit in the dead front center, and has some other body-issues along with a salvage title. As some of you may know I was trying to sell it, but now it's time to part it out.

    Mechanically VERY strong. The top motors have been tested and work wonderfully.

    Jon (at) ccbikeshop.com # 316-755- one four nine three

    I need ALL parts gone. Thank you!

    Some high-demand parts:
    * Both half-shafts - $60/set
    * Mirrors, excellent condition - $35/set
    * Steering wheel, good condition later-style - $20
    * All turn-signals work
    * Taillights, excellent condition tails, later-style - $40/each or $70/set
    * Door panels, good condition, 8/10 - $35/each or $60/set
    * Rear interior panels, good condition also - $40/each or $70/set

    SOLD PARTS:

    Power top frame, with almost brand-new German canvas, new tension straps/cables, $1000 - NOTE: almost two sets of seals and retainers are still for sale.
    3rd brake light lens
    Hardtop mounting hole plugs
    AFM
    (2x) Good straight 14" bastet-weaves, (which means I still have several left)
    OBC
    FT and rear speaker panels (still have the interior panels, including the rear ones under rear windows)
    Plastic bumper impact strips (black plastic trim)
    Turn signal stalk
    Lower kick panel
    4 excellent center caps, I still have another set left, and a bunch of emblems
    Hood and trunk emblems are gone
    Defrost switch
    2 door tweeters
    Strut housings (still have shocks, springs, etc.
    2 more 14" weaves gone, I have two good straight ones left with 3k miles on Yoko's
    Front seats, including headrests and rails
    Rear seat, both pieces
    Cluster
    Shifter boot
    Fuel pump
    Convertible top motors, both of them sold
    Shift knob, almost new
    Hood shock
    Fog light switch and wiring harness
    5-speed tranny, 107,000 miles, smooth, no play or grinding
    Clutch
    Shift linkage
    Driveshaft
    Pressure plate
    Flywheel
    Wiper motor / switch
    Glovebox
    Catalytic converter (still have pipes and rest of exhaust)
    UUC Rotors - Full set
    Clutch/brake pedal assembly
    Trunk lifts
    Passenger quarter (rear window) glass
    Pass. rear window regulator / motor
    Half-shafts
    Fog lights
    Last edited by JonathanJ.; 02-04-2008, 07:01 AM.
  • Mastrcruse
    R3V Elite
    • Sep 2005
    • 5340

    #2
    whats the color of the interior?

    Comment

    • ColdAccord
      R3V Elite
      • Oct 2003
      • 5926

      #3
      I need; glove box latch and a key, fuel pump, shift boot, and a shift knob if you have an aftermarket one

      pm me if you have any of these please. thanks
      Originally posted by blunt
      can you get me a deal on cases of their (fiji) bottled water? i wash my 02 in that shit

      Comment

      • JonathanJ.
        Advanced Member
        • Aug 2007
        • 145

        #4
        Originally posted by Mastrcruse
        whats the color of the interior?
        Tan leather. See some pictures of the car here: http://www.r3vlimited.com/gallery/br...3&userid=15249

        Comment

        • JonathanJ.
          Advanced Member
          • Aug 2007
          • 145

          #5
          Originally posted by ColdAccord
          I need; glove box latch and a key, fuel pump, shift boot, and a shift knob if you have an aftermarket one

          pm me if you have any of these please. thanks
          PM'd!

          Comment

          • Lair
            E30 Mastermind
            • Apr 2006
            • 1553

            #6
            I need a waterpump pulley, an ignition coil, an ICV with hoses, the throttle body, the AFM, and all the hoses that go with them. I also need the small water fitting that bolts to the back of block underneath the head.
            Get me a price shipped to Birmingham, AL 35242, please.

            Thanks!

            (I need the parts to fit an i motor.)
            McCain's military draft: Are you willing to bet your life?

            Comment

            • devonjordan
              R3VLimited
              • Jul 2006
              • 2386

              #7
              Ill take the tails if they are in good condition, ie no cracks and scrapes.
              Hemingway said it best. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.”

              Help a brother out, buy your detailing products here...

              Comment

              • JonathanJ.
                Advanced Member
                • Aug 2007
                • 145

                #8
                Originally posted by devonjordan
                Ill take the tails if they are in good condition, ie no cracks and scrapes.
                PM sent.

                Comment

                • new guy
                  E30 Addict
                  • Sep 2004
                  • 467

                  #9
                  pm sent
                  Those that think they are, are not as they really are...

                  Comment

                  • Ali//325i
                    Wrencher
                    • Jul 2005
                    • 270

                    #10
                    how are the plastic bumper trim pieces? I need trim all the way around.

                    -Ali

                    Comment

                    • Lair
                      E30 Mastermind
                      • Apr 2006
                      • 1553

                      #11
                      I've always wanted to be invisible.
                      McCain's military draft: Are you willing to bet your life?

                      Comment

                      • JonathanJ.
                        Advanced Member
                        • Aug 2007
                        • 145

                        #12
                        Originally posted by Lair
                        I've always wanted to be invisible.
                        You've got a tall order, and mostly of parts that haven't even been removed yet, I'll get you some info ASAP. I DO have everything you need!

                        Comment

                        • JonathanJ.
                          Advanced Member
                          • Aug 2007
                          • 145

                          #13
                          Originally posted by Ali//325i
                          how are the plastic bumper trim pieces? I need trim all the way around.

                          -Ali
                          PM Sent. All bumper cover trim pieces are good. $75 for all 6 pieces.

                          Comment

                          • Ali//325i
                            Wrencher
                            • Jul 2005
                            • 270

                            #14
                            Originally posted by JonathanJ.
                            PM Sent. All bumper cover trim pieces are good. $75 for all 6 pieces.
                            I hit you back. Send me pics whenever you get a chance.

                            -Ali

                            Comment

                            • bmwsmurf
                              E30 Addict
                              • Jul 2004
                              • 509

                              #15
                              how the heck did the top sell so fast. oh well.
                              Visit the 3 series heritage site (work in progress):
                              http://www.creativesmurf.com

                              Comment

                              Working...