Random leftover parts from m50 swap

[318isbmw]

All prices are negotiable, and shipping is not included. Lemme know if you want pics of anything, I have pics, but I don't feel like posting all of the pics since it would be a huge thread.

735i brake reservoir $75 brand new only put on the car to mock up
M42 A/C lines and Drying container $50
M42 Clutch fan and fan $30 clutch replaced a year ago
E30 318i early pilot bearing (new) $5 each
E30 318is AFM and filter housing $130
E30 318is brake setup (booster, master cylinder and reservoir) needs the rubber fittings between reservoir and master cylinder $70
E30 318is Fan Shroud $30
E30 m42 ecu $75
E30 318is coilpack $50
E30 318is driveshaft, no center bearing the bolt between the two sides $70
E30 318is dual mass flywheel $30
E30 318is intake pipe $15
E30 325i stock shifter rod $20
E36 325i never installed upper radiator hose $20
E36 325i vacuum hose which goes under the manifold down to the ICV $8
E36 325i starter, condition unknown, I’ll put a charge to it and see if it works $20
E36 flexplate $20
E36 325i power wire, goes from the starter and alternator to the positive terminal, deleted in e30 swap $5
E36 325i wire cover, few cuts to get out the wiring harness, but closes and stays tight $10
E30 318i early model midpipe. Complete, unknown manufacturer, was told it was Borla and the guy had it in his garage for some years planning on building a track car early 318i. Never used and no rust, perfect condition w/ mounts and all. $60
Vanos unit, minus solenoid $50
U.S. grills $30

Thanks

Brendan

[workaholic]

Hey Brendan, I didn't know you did a M50 swap on your e30! good luck with the sale.


Tom (with the turbo e36 318 )

[318isbmw]

Hey Brendan, I didn't know you did a M50 swap on your e30! good luck with the sale.


Tom (with the turbo e36 318 )

Ya, was kinda last minute random kinda thing, blew up the m42 pretty well so had to do something. Howz the e36 comin along, howz life been?

[318isbmw]

Bump, need to get rid of the parts from the m42 sitting around.

[new guy]

m42 driveshaft needed... still around?

[318isbmw]

I have both sides, I don't have the screw that tightens the middle down. Got lost during the swap. But I've got both sides less center bearings.

[txleadfoot]

I have both sides, I don't have the screw that tightens the middle down. Got lost during the swap. But I've got both sides less center bearings.

I think your prices are too high.

[318isbmw]

I think your prices are too high.

Thats why it says all prices are negotiable. Lemme know what ur interested in and we can work something out.